We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
NEC LT676 projector lamp module with 180W NSH bulb in housing

NEC Display Solutions

NEC LT676 180W projector lamp with NSH bulb

SKU CH-PRH2-YBA74

A complete 180 W replacement lamp module with NSH bulb and housing, ready for quick installation and rated for 2,000 hours of use

  • TypeProjector Lamp
  • Wattage180W
  • Lamp Life2,000 Hrs.
  • Ready-to-install module saves setup time
  • Genuine NSH 180W bulb delivers rated brightness
  • 2 000-hour rated life supports extended use
  • Manufactured to ISO 9001 quality standards
  • Direct OEM replacement fits NEC projectors

Ready-to-install NEC LT676 lamp module

The NEC LT676 is a new 180 W projector lamp that ships as a complete bulb-and-housing assembly. It uses an NSH bulb rated for 2,000 hours of operation. The module is manufactured to ISO 9001 quality standards and matches the original VT75LP specification for direct replacement.

Suits owners of compatible NEC projectors needing

This lamp fits projectors that accept the LT676 or VT75LP module and require a 180 W NSH light source. It is not for users whose projector calls for a different wattage, a different lamp code or a bare bulb without housing.

180 W NSH bulb with 2,000-hour rated life

The single specification that decides fit is the 180 watt NSH bulb rated at 2,000 hours inside the LT676 housing. Verify that your projector’s service manual lists LT676 or VT75LP before ordering.

Highlights

  • Ready-to-install module saves setup time
  • Genuine NSH 180W bulb delivers rated brightness
  • 2 000-hour rated life supports extended use
  • Manufactured to ISO 9001 quality standards
  • Direct OEM replacement fits NEC projectors

Specifications

BrandNEC
TypeProjector Lamp
Wattage180W
Lamp Life2,000 Hrs.

Questions about this item

What projector models accept the LT676 lamp module?

The LT676 is built for NEC projectors that use the VT75LP lamp code; check your projector manual to confirm VT75LP compatibility before purchase.

How do I install the LT676 lamp module, and what step is often missed?

Power off and cool the projector, remove the lamp cover, release the retaining screws, slide the old module out, insert the new LT676 until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp-hour counter in the menu — the counter reset is the step most often forgotten.

When will the NSH 180W bulb need replacement?

The lamp is rated for 2000 hours of typical use; plan a replacement when the projector warning appears or image brightness drops noticeably.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.