NEC Display Solutions
NEC Display Solutions VT85LP Projector Lamp 200W
A 200W replacement lamp module with bulb and housing, rated for 2,000 normal or 3,000 economy hours
- TypeProjector Lamp
- Wattage200W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready to install with pre-assembled bulb and housing
- Genuine Ushio NSH 200W bulb ensures reliable brightness
- Lamp life up to 3000 hours in economy mode
- Manufactured to ISO 9001 quality standards
- OEM replacement module fits NEC projectors directly
VT85LP Replacement Lamp
The NEC VT85LP is a new 200W projector lamp module supplied as a fully assembled bulb and housing. It uses a Ushio NSH bulb and is manufactured to ISO9001 standards. The lamp is ready for direct installation into compatible NEC projectors without additional assembly.
For NEC projector maintenance
This module suits owners of NEC projectors that accept the VT85LP part who need a replacement lamp with the original 200W rating. Buyers who require a different wattage, a bare bulb without housing, or a lamp for a non-NEC projector should look at alternative parts.
Check projector compatibility
Before ordering, verify that your NEC projector lists the VT85LP as the correct replacement lamp. Confirm the lamp compartment accepts a pre-assembled module and note the rated life of 2000 hours in normal mode or 3000 hours in economy mode.
Highlights
- Ready to install with pre-assembled bulb and housing
- Genuine Ushio NSH 200W bulb ensures reliable brightness
- Lamp life up to 3000 hours in economy mode
- Manufactured to ISO 9001 quality standards
- OEM replacement module fits NEC projectors directly
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 200W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Which NEC projector models accept the VT85LP 200W lamp module?
The VT85LP module fits NEC projectors designed for the VT85LP part number; check your projector manual to confirm compatibility before purchase.
Will the 200W NSH bulb run in a projector that originally shipped with a different wattage lamp?
No — the projector must be rated for a 200W NSH lamp; using a different wattage can cause ignition failure or damage.
How do I verify the lamp is operating correctly after installation?
Reset the projector’s lamp-hour counter, then confirm the menu shows zero hours and the image reaches full brightness without flicker.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
MADE IN USA TONER toner cartridge for KIP 7170 103 2 x 400 gm black
- Black
- Compatible



