NEC Display Solutions
NEC Display Solutions NP63 200W Projector Lamp
A 200 W replacement lamp module with a new Philips UHP bulb and housing, ready for easy installation and rated for 2 500 to 3 500 hours of use
- TypeProjector Lamp
- Wattage200W
- Lamp Life2,500 (Normal) - 3,500 (Economy) Hrs.
- Ready to install with pre-assembled housing
- 200W UHP bulb matches original brightness
- 2,500 hours normal or 3,500 hours economy life
- Built to ISO 9001 quality standards
- Tested for beam performance ignition voltage and run-time
Compatible NEC NP63 Lamp Module
The NEC NP63 lamp module is a new 200W replacement projector lamp designed for compatible NEC projectors. It ships as a fully assembled bulb and housing for straightforward installation. Each unit undergoes strict quality checks for beam performance and run-time to ensure reliable operation.
Suitable for NEC Projector Maintenance
This lamp suits users maintaining NEC projectors that accept the NP63 module and who want a ready-to-install OEM or compatible option. It is not for buyers whose projector requires a different lamp code or a different wattage bulb. Shoppers needing a lamp with a longer rated life than 3,500 hours in Economy mode should look at other models.
200W UHP Lamp with 3,500 Hour Economy Life
The lamp uses a 200W UHP bulb rated for 2,500 hours in Normal mode and 3,500 hours in Economy mode. This wattage and rated lifespan determine whether the module matches the projector’s original specifications. Verify the NP63 part number against your projector manual before ordering.
Highlights
- Ready to install with pre-assembled housing
- 200W UHP bulb matches original brightness
- 2,500 hours normal or 3,500 hours economy life
- Built to ISO 9001 quality standards
- Tested for beam performance ignition voltage and run-time
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 200W |
| Lamp Life | 2,500 (Normal) - 3,500 (Economy) Hrs. |
Questions about this item
How do I install the NP63 lamp module, and what step do people often miss?
The NP63 ships as a fully assembled 200W bulb and housing. Slide it into the projector until the connector seats firmly, then secure the retaining screw; the step most people skip is resetting the lamp-hour counter in the menu so the 2,500-hour normal or 3,500-hour economy timer starts from zero.
What maintenance or replacement will the NP63 lamp need later?
The 200W UHP bulb is rated for 2,500 hours in normal mode or 3,500 hours in economy mode; once the projector warns that the limit is reached, replace the entire NP63 module — no separate filter or fan service is required for the lamp itself.
What limit appears first during sustained use of the NP63 lamp?
The 200W UHP bulb reaches its rated life of 2,500 hours in normal mode or 3,500 hours in economy mode before any other component in the module; the projector will prompt replacement when that hour count is hit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



