NEC Display Solutions
NEC Display Solutions NP610 Genuine Compatible Projector Lamp 210W
A 210 W replacement lamp module rated for 3,000 normal or 4,000 economy hours
- TypeProjector Lamp
- Wattage210W
- Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
- Genuine NSH 210W bulb delivers reliable brightness
- Lamp life reaches 3,000 hours normal or 4,000 hours economy
- Pre-assembled housing enables quick tool-free installation
- Manufactured to ISO 9001 quality standards
- Compatible with NEC NP610 projector models
Genuine Compatible NP610 Projector Lamp
The NEC NP610 is a new 210W replacement lamp module supplied as a fully assembled bulb and housing for quick installation. It fits NEC projectors that use the NP07LP module and is built to ISO9001 quality standards using OEM or genuine compatible components.
Upgrade From Worn Or Failed Lamps
Replace an ageing lamp when brightness drops or the projector warns of end-of-life. The jump is worth it when the current module has reached or exceeded the rated 3000 hours in normal mode or 4000 hours in economy mode.
Practical Limits Of The 210W NSH Lamp
Lamp life is rated at 3000 hours in normal mode and 4000 hours in economy mode; actual runtime varies with usage patterns and environmental conditions. The module is rated at 210W, so the projector must support that wattage for correct ignition and beam performance.
Highlights
- Genuine NSH 210W bulb delivers reliable brightness
- Lamp life reaches 3,000 hours normal or 4,000 hours economy
- Pre-assembled housing enables quick tool-free installation
- Manufactured to ISO 9001 quality standards
- Compatible with NEC NP610 projector models
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 210W |
| Lamp Life | 3,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
What projector model does the NP610 lamp module fit?
The NP610 lamp module is built for NEC projectors that use the NP07LP lamp type and includes the 210W NSH bulb already mounted in its housing.
What is the correct installation step for the NP610 lamp module?
Power off and unplug the projector, let it cool completely, remove the lamp cover, slide the new NP610 module in until it seats firmly, then replace the cover before turning the unit on.
When should the NP610 lamp be replaced?
Plan replacement after about 3000 hours in normal mode or 4000 hours in economy mode, when brightness drops noticeably or the projector signals end of lamp life.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



