NEC Display Solutions
NEC Display Solutions NP510 Projector Lamp 180W NSH 4000 5000 Hrs
Genuine compatible replacement lamp module with 180 W NSH bulb and housing, rated for 4,000 normal or 5,000 economy hours
- TypeProjector Lamp
- Wattage180W
- Lamp Life4,000 (Normal) - 5,000 (Economy) Hrs.
- Genuine 180W NSH lamp restores factory brightness
- 4000 normal or 5000 economy hours extends replacement interval
- Pre-assembled bulb and housing enables quick tool-free swap
- ISO 9001 manufacturing ensures consistent ignition and beam quality
- Compatible with NEC NP510 projectors using NP14LP module
Ready-to-install NEC NP510 lamp
The NEC NP510 is a complete 180W replacement module with the NSH bulb already fitted inside its housing. It arrives ready for immediate installation in compatible NEC projectors without any assembly required. The unit is supplied new and meets ISO 9001 manufacturing standards for consistent beam performance and run-time.
For owners needing a direct 180W replacement
This module suits anyone whose NEC projector specifies the NP510 or NP14LP lamp code and who wants a straightforward swap with the original wattage. Buyers whose projectors require a different lamp code, a different wattage, or a bare bulb without the housing should look at other listings.
Lamp life of 4000 normal or 5000 economy hours
In normal mode the lamp is rated for 4000 hours of operation. Switching the projector to economy mode extends the rated life to 5000 hours, giving a clear basis for planning replacement intervals.
Highlights
- Genuine 180W NSH lamp restores factory brightness
- 4000 normal or 5000 economy hours extends replacement interval
- Pre-assembled bulb and housing enables quick tool-free swap
- ISO 9001 manufacturing ensures consistent ignition and beam quality
- Compatible with NEC NP510 projectors using NP14LP module
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 180W |
| Lamp Life | 4,000 (Normal) - 5,000 (Economy) Hrs. |
Questions about this item
Which NEC projectors accept the NP510 lamp module with the 180W NSH bulb?
The NP510 lamp module is designed as a direct replacement for NEC projectors that use the NP14LP lamp code; check your projector manual for the NP14LP designation before ordering.
What is the correct sequence for installing the NP510 lamp module and resetting the hour counter?
Power off and unplug the projector, allow it to cool, remove the lamp cover, slide out the old module, insert the new NP510 unit until it seats firmly, replace the cover, then use the on-screen menu to reset the lamp timer to zero.
How many hours can I expect from the 180W NSH bulb in normal and economy modes before replacement?
The lamp is rated for 4,000 hours in normal mode and 5,000 hours in economy mode; plan a replacement when the projector warns of end-of-life or brightness drops noticeably.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



