NEC Display Solutions
NEC Display Solutions NP400 projector lamp 210W
A 210W replacement lamp module with a 3,000-hour normal or 4,000-hour economy life, supplied as a ready-to-install bulb and housing unit
- TypeProjector Lamp
- Wattage210W
- Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
- 210 W NSH bulb delivers bright output
- 3,000 hours normal mode extends replacement interval
- 4,000 hours economy mode lowers running cost
- Pre-assembled housing enables quick installation
- ISO 9001 production checks ensure reliable ignition
Genuine 210W Replacement Lamp
This 210 watt NSH lamp module arrives fully assembled with bulb and housing for straightforward installation in compatible NEC projectors. It is built to ISO9001 quality standards using OEM components from manufacturers such as Philips, Osram or Ushio. The unit is supplied new and ready for immediate use.
Suited for standard brightness needs
It serves users who need a direct replacement delivering the manufacturer-rated output for everyday presentations or classroom use. Buyers requiring higher lumen output or longer maintenance intervals than the rated lamp life should consider alternative solutions.
Rated 3000 to 4000 hours
In normal mode the lamp provides approximately 3000 hours of operation, extending to around 4000 hours when the projector runs in economy mode. Heavy daily use will reach the rated limit sooner, while occasional use allows the full hour range to be realised.
Highlights
- 210 W NSH bulb delivers bright output
- 3,000 hours normal mode extends replacement interval
- 4,000 hours economy mode lowers running cost
- Pre-assembled housing enables quick installation
- ISO 9001 production checks ensure reliable ignition
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 210W |
| Lamp Life | 3,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
Which NEC projectors accept the NP07LP lamp module so I can confirm it fits my unit?
The NP07LP module is built for NEC projectors that specify the NP400 lamp; check your projector’s manual or the label on the existing lamp to verify it lists NP400 or NP07LP before ordering.
Can I keep using the same air filter and cooling setup when I swap in this 210 W NSH lamp?
Yes — the replacement lamp matches the original 210 W rating, so the projector’s existing cooling and filter system handles it without any changes.
After installing the lamp, how do I confirm the projector registers the new module and starts counting hours correctly?
Power on the projector, open the lamp-status menu, and verify the hour counter resets to zero and the reported mode shows 3000 hours normal or 4000 hours economy.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



