NEC Display Solutions
NEC Display Solutions NP17LP projector lamp 265W
Genuine replacement lamp module with 265W UHP bulb delivers 3,000 normal or 3,500 economy hours of projection life
- TypeProjector Lamp
- Wattage265W
- Lamp Life3,000 (Normal) - 3,500 (Economy) Hrs.
- Genuine 265W UHP lamp delivers 3,000 normal hours
- Economy mode extends usable life to 3,500 hours
- Pre-assembled bulb and housing enables quick installation
- ISO 9001 manufacturing ensures consistent beam performance
- Compatible with NEC NP-M420XG projector model
Direct replacement module
The NEC NP17LP lamp module delivers a 265W UHP bulb pre-mounted in its housing for tool-free installation in compatible NEC projectors. It restores factory brightness and colour balance without requiring alignment or additional parts.
ISO9001-tested build
Each unit passes beam-performance, ignition, voltage, appearance, connection and run-time checks under ISO9001 procedures. The sealed housing protects the bulb during handling and ensures a secure fit in the projector’s lamp compartment.
Extended economy runtime
Normal-mode operation provides 3000 hours of use, while economy mode extends that to 3500 hours, reducing the frequency of replacements. The module is backed by a 90-day warranty and a 30-day return window for added purchase confidence.
Highlights
- Genuine 265W UHP lamp delivers 3,000 normal hours
- Economy mode extends usable life to 3,500 hours
- Pre-assembled bulb and housing enables quick installation
- ISO 9001 manufacturing ensures consistent beam performance
- Compatible with NEC NP-M420XG projector model
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 265W |
| Lamp Life | 3,000 (Normal) - 3,500 (Economy) Hrs. |
Questions about this item
What projector model does the NP17LP 265W lamp fit?
The NP17LP module is built for the NEC NP-M420XG projector and slides directly into that chassis.
What physical space does the NP17LP lamp module require inside the projector?
It ships as a complete bulb-and-housing assembly sized to match the original NP-M420XG lamp cavity, so no extra brackets or adapters are needed.
What is the correct way to install the NP17LP lamp and what step do people often miss?
Power off and unplug the NP-M420XG, open the lamp door, remove the old module, insert the new NP17LP until it seats firmly, close the door, then reset the lamp-hour counter in the projector menu — skipping the reset is the common mistake.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



