NEC Display Solutions
NEC Display Solutions NP06LP 330W projector lamp
A 330 W replacement lamp module with bulb and housing ready to install, rated for 2,000 hours normal or 3,000 hours economy use
- TypeProjector Lamp
- Wattage330W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready-to-install module with 330 W Philips NSH bulb
- 2 000 hours normal or 3 000 hours economy lamp life
- Manufactured to ISO 9001 quality standards
- Tested for beam performance, ignition, voltage and run-time
- New OEM replacement lamp for NEC projectors
Ready-to-install lamp module
The NEC NP06LP is a complete replacement lamp module that combines a 330W Philips NSH bulb with its housing. It arrives fully assembled so technicians can swap it into a compatible NEC projector without additional tools or alignment steps.
Restores original brightness and runtime
This module replaces a lamp that has reached the end of its 2,000-hour normal or 3,000-hour economy rated life. The jump is worth it when image dimming, colour shift or a projector warning indicates the existing lamp can no longer deliver the specified output.
Confirm projector compatibility and lamp-hour reset
Before ordering, verify that the projector model accepts the NP06LP part number and that the installation procedure includes a lamp-hour counter reset. The module is manufactured to ISO9001 standards and undergoes ignition, voltage and run-time checks, but it will not function in projectors that require a different lamp code.
Highlights
- Ready-to-install module with 330 W Philips NSH bulb
- 2 000 hours normal or 3 000 hours economy lamp life
- Manufactured to ISO 9001 quality standards
- Tested for beam performance, ignition, voltage and run-time
- New OEM replacement lamp for NEC projectors
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 330W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
What projector models accept the NP06LP lamp housing?
The NP06LP module is built for NEC projectors that specify this part number; check your projector manual to confirm compatibility before fitting.
What is the correct way to seat the lamp module and the step installers often miss?
Power off and cool the projector, remove the lamp cover, slide the NP06LP housing in until it clicks, then reset the lamp-hour counter in the menu — skipping the reset is the common error.
When should the NSH 330W bulb be replaced based on its rated life?
Plan replacement after about 2,000 hours in normal mode or 3,000 hours in economy mode, as brightness drops toward those limits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



