We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
NEC NP-U321Hi-TM projector lamp module with 260W UHP bulb in housing

NEC Display Solutions

NEC Display Solutions NP-U321Hi-TM projector lamp 260W

SKU CH-7GPV-PJPJC

A new 260 W UHP lamp module with 3,000-hour rated life, supplied in a ready-to-install housing for NEC projectors

  • TypeUHP
  • Wattage260W
  • Lamp Life3,000 hrs
  • Genuine Philips UHP bulb ensures reliable ignition and colour accuracy
  • 260 W power rating matches the projector's original specification
  • 3,000 hour rated life reduces replacement frequency
  • Pre-assembled housing allows tool-free installation in minutes
  • Manufactured under ISO 9001 quality controls for consistent performance

NEC NP-U321Hi-TM projector lamp module

The NEC NP-U321Hi-TM module is a complete replacement lamp assembly built around a new Philips UHP 260W bulb. It arrives fully housed so the projector can be relamped without separate bulb handling. The unit is manufactured to ISO 9001 quality standards and is intended for users whose NEC projector has reached the end of its original lamp life.

Installation ease and common pitfalls

The lamp module slides into the projector’s lamp compartment and locks with the existing retaining screws, requiring no special tools. Care must be taken not to touch the glass envelope of the UHP bulb, as skin oils can create hot spots and shorten the rated 3,000 hrs service life. After fitting, the projector’s lamp-hour counter must be reset through the on-screen menu so the replacement timer starts from zero.

Behaviour under sustained load

During continuous operation the 260W UHP lamp maintains stable ignition and consistent light output for the rated 3,000 hrs. The housing and connections are validated for repeated thermal cycling, so brightness does not degrade prematurely when the projector runs for extended sessions. Each unit undergoes beam-performance and run-time checks before shipping to ensure reliable operation throughout the full lamp life.

Highlights

  • Genuine Philips UHP bulb ensures reliable ignition and colour accuracy
  • 260 W power rating matches the projector's original specification
  • 3,000 hour rated life reduces replacement frequency
  • Pre-assembled housing allows tool-free installation in minutes
  • Manufactured under ISO 9001 quality controls for consistent performance

Specifications

BrandNEC
TypeUHP
Wattage260W
Lamp Life3,000 hrs

Questions about this item

How can I confirm the 260W lamp is working correctly after installing it in my NEC projector?

Power on the projector and verify the lamp indicator shows normal operation; the unit should reach full brightness without flickering and the timer will begin counting toward the 3,000-hour rated life.

What comes in the box with the NP-U321Hi-TM lamp module, and is anything else required for installation?

The module includes a fully assembled Philips UHP 260W bulb inside its housing, ready to fit directly into compatible NEC projectors; no extra parts or tools are needed.

Which version of the NP-U321Hi-TM lamp should I choose among the OEM and compatible options?

All versions meet ISO9001 quality checks for beam performance, ignition, voltage and run-time; select the OEM version from the original bulb manufacturer for exact-match specifications or the compatible version for a lower-cost alternative.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.