We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
NEC projector lamp module with 350W bulb in housing

NEC Display Solutions

NEC Display Solutions NP-PA621X projector lamp 350W

SKU CH-6AY4-67BXA

350 W replacement lamp module with Philips UHP bulb, 3,000 to 4,000 hour life, ready to install

  • TypeProjector Lamp
  • Wattage350W
  • Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
  • 3,000–4,000 hours lamp life from 350W UHP bulb
  • Ready-to-install module with bulb and housing assembled
  • OEM Philips bulb ensures reliable ignition and beam performance
  • Manufactured under ISO9001 quality checks for consistent run-time
  • NP26LP part number matches original NEC projector specification

Ready-to-install lamp module

This NEC NP-PA621X replacement lamp ships as a complete 350W bulb-and-housing assembly for immediate installation in compatible NEC projectors. The module uses a Philips UHP lamp and is built to ISO9001 quality standards for reliable ignition and consistent beam performance. It is intended for operators who need a direct OEM-spec replacement without additional assembly steps.

Restores original brightness and runtime

The lamp replaces a depleted or failed NP26LP module and returns the projector to its factory-rated output of 3,000 hours in normal mode or 4,000 hours in economy mode. The upgrade is worthwhile when image brightness has dropped below usable levels or when the projector signals end-of-life for the current lamp. It is not suited for users seeking higher lumen output than the projector's original specification.

Fits NP-PA621X projectors directly

The assembled housing matches the projector's lamp compartment so no extra brackets or adapters are required. Installation frees the operator from handling a bare bulb and reduces downtime to a single module swap. Buyers who need a different wattage, a bare bulb without housing, or compatibility with non-NEC models should look elsewhere.

Highlights

  • 3,000–4,000 hours lamp life from 350W UHP bulb
  • Ready-to-install module with bulb and housing assembled
  • OEM Philips bulb ensures reliable ignition and beam performance
  • Manufactured under ISO9001 quality checks for consistent run-time
  • NP26LP part number matches original NEC projector specification

Specifications

BrandNEC
TypeProjector Lamp
Wattage350W
Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.

Questions about this item

Does the NP26LP housing fit directly into the NP-PA621X projector without extra brackets?

Yes, the module ships as a fully assembled 350 W bulb in its housing so it seats directly in the NP-PA621X lamp compartment with no additional brackets required.

What is the installation step users most often miss when fitting the NP26LP lamp?

After sliding the module in, the retaining screw must be tightened and the lamp-hour counter reset through the projector menu; skipping the reset leaves the old timer active and triggers premature replacement warnings.

When should I plan to replace the NP26LP lamp based on its rated hours?

Expect roughly 3 000 hours in Normal mode or 4 000 hours in Economy mode before brightness drops to half, so schedule a replacement around those intervals.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.