NEC Display Solutions
NEC Display Solutions NP-P420X Projector Lamp 265W NP17LP
A 265 W replacement lamp module with assembled housing, rated for 3,000 hours normal or 3,500 hours economy use
- TypeProjector Lamp
- Wattage265W
- Lamp Life3,000 (Normal) - 3,500 (Economy) Hrs.
- 265W UHP lamp delivers bright projection
- 3000 hours normal life extends replacement intervals
- 3500 hours economy mode reduces running costs
- Fully assembled housing enables quick installation
- ISO9001 manufacturing ensures consistent quality
NP17LP lamp for NP-P420X projectors
This 265W replacement lamp module is built for NEC NP-P420X projectors. It ships as a complete housing with a new Osram UHP bulb, so installation is straightforward. The lamp is rated for 3,000 hours in normal mode and 3,500 hours in economy mode. It suits users who need a direct, ready-to-fit replacement for a dimming or failed original lamp.
ISO9001 build and plug-in housing
Each unit is manufactured to ISO9001 standards and tested for beam performance, ignition, voltage, appearance, connections and run-time. The pre-assembled housing eliminates the need to handle a bare bulb or align separate parts during installation. This design reduces downtime and avoids the risk of contaminating the optical path when swapping lamps.
Check NP-P420X model match before ordering
Verify that your projector is the NP-P420X and that the required lamp code is NP17LP. The product is not suitable for other NEC models or for projectors that use a different lamp code or wattage. Buyers who need a different lamp type or a higher-wattage module should look elsewhere.
Highlights
- 265W UHP lamp delivers bright projection
- 3000 hours normal life extends replacement intervals
- 3500 hours economy mode reduces running costs
- Fully assembled housing enables quick installation
- ISO9001 manufacturing ensures consistent quality
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 265W |
| Lamp Life | 3,000 (Normal) - 3,500 (Economy) Hrs. |
Questions about this item
What wattage bulb does the NP17LP lamp module use, and what lamp life does that deliver in normal mode?
The module uses a 265W UHP bulb and is rated for 3,000 hours in normal mode.
Does the NP17LP arrive as a complete housing assembly, or must I fit the bare bulb into my old cage?
It ships as a fully assembled bulb and housing, so no separate cage installation is required.
What is the first step when installing the NP17LP, and which step do users most often skip?
Power off and unplug the projector, let it cool completely, then remove the lamp cover; users often skip the cooling wait and risk burns or sensor errors.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



