NEC Display Solutions
NEC Display Solutions ME301X Projector Lamp 235W NP43LP
A ready-to-install 235W replacement lamp module rated for 5000 hours normal or 9000 hours economy use
- TypeProjector Lamp
- Wattage235W
- Lamp Life5,000 Hrs. (Normal) - 9,000 Hrs. (Economy)
- Ready to install with pre-assembled housing
- Bright 235W output for clear projection
- Long 5,000-hour life in normal mode
- Extended 9,000-hour life in economy mode
- Built to ISO 9001 quality standards
Ready-to-install module
The NEC ME301X replacement lamp ships as a complete 235 W bulb-and-housing assembly, so it fits straight into the projector without extra assembly. It is intended for users who need a drop-in service part for the NP43LP socket.
5,000 to 9,000 hour runtime
In normal mode the lamp is rated for 5,000 hours and in economy mode for 9,000 hours, giving a clear window for scheduling replacements. Heavy daily use will reach the normal-life limit sooner, while intermittent presentation use stays closer to the economy figure.
AC 235 W Philips bulb
The module uses an AC-driven Philips 235 W bulb, and that electrical characteristic determines whether it matches the projector's ballast. Buyers whose units require a different wattage or lamp voltage cannot use this part.
Highlights
- Ready to install with pre-assembled housing
- Bright 235W output for clear projection
- Long 5,000-hour life in normal mode
- Extended 9,000-hour life in economy mode
- Built to ISO 9001 quality standards
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 235W |
| Lamp Life | 5,000 Hrs. (Normal) - 9,000 Hrs. (Economy) |
Questions about this item
Will the NP43LP lamp module fit my existing NEC ME301X projector without modification?
The NP43LP is a fully assembled 235W bulb-and-housing module built for the NEC ME301X, so it installs directly into that projector with no extra parts or changes needed.
How can I verify the 235W lamp is performing correctly after installation?
After fitting the NP43LP, check the projector’s lamp-hour counter; it should start near zero and the image should reach full brightness without flickering, confirming the 235W AC bulb is igniting and running as specified.
Does the NP43LP package include the complete housing or only the bare bulb, and must I buy a separate cage?
The NP43LP arrives as a complete lamp module with the Philips 235W AC bulb already mounted in its housing, so no separate cage or additional components are required for installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



