NEC Display Solutions
NEC Display Solutions M402WG Projector Lamp 270W
Genuine 270 W DLP lamp module with housing delivers 3,500 normal or 8,000 economy hours for NEC projectors
- TypeProjector Lamp
- Wattage270W
- Lamp Life3,500 (Normal) - 8,000 (Economy) Hrs.
- Ready-to-install module with bulb and housing
- 270W DLP lamp for compatible NEC projectors
- 3,500 hours normal mode lamp life
- Up to 8,000 hours in economy mode
- Manufactured to ISO 9001 quality standards
Ready-to-install lamp module
The NEC M402WG replacement lamp arrives as a fully assembled 270W bulb and housing unit. It is designed for direct installation in compatible NEC projectors without additional assembly. The module uses a genuine Philips DLP lamp and is manufactured to ISO9001 quality standards. Condition is new and ready for immediate use.
Restores original brightness and runtime
This lamp replaces a depleted or dimming projector lamp to bring light output back to specification. Rated life is 3500 hours in normal mode and 8000 hours in economy mode, so the upgrade is worthwhile when the existing lamp nears those limits. The OEM-compatible versions match the original manufacturer beam performance, ignition voltage and run-time specifications.
Fits supported NEC projectors
The module slots into the projector lamp compartment using the existing connector and mounting points. No extra tools, cables or adapters are required beyond what the projector already provides. It frees the user from sourcing a bare bulb and separate housing, saving installation time. Buyers who need a different wattage or a lamp for a non-NEC model should look elsewhere.
Highlights
- Ready-to-install module with bulb and housing
- 270W DLP lamp for compatible NEC projectors
- 3,500 hours normal mode lamp life
- Up to 8,000 hours in economy mode
- Manufactured to ISO 9001 quality standards
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 270W |
| Lamp Life | 3,500 (Normal) - 8,000 (Economy) Hrs. |
Questions about this item
What housing does the NEC M402WG lamp module include for installation?
The module arrives as a fully assembled 270 W Philips DLP bulb inside its housing, so the complete unit slides into the projector without separate assembly steps.
Which screw or latch must be released before sliding the NP30LP module into the projector?
Power down and cool the projector, then loosen the single captive screw on the lamp cover; the module seats firmly when pushed straight in until the screw catches.
How many hours can the 270 W bulb run before replacement in normal and economy modes?
Expect about 3,500 hours in normal mode or up to 8,000 hours in economy mode before the lamp requires replacement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



