NEC Display Solutions
NEC Display Solutions M332XSG Projector Lamp 270W
A 270W replacement lamp module with Philips DLP bulb and housing, offering 3,500 to 8,000 hours of life
- TypeProjector Lamp
- Wattage270W
- Lamp Life3,500 (Normal) - 8,000 (Economy) Hrs.
- Ready-to-install module saves setup time
- 270W Philips DLP bulb delivers bright output
- 3,500 hours normal life reduces replacements
- 8,000 hours economy mode extends intervals
- ISO 9001 manufacturing ensures consistent quality
NEC M332XSG 270W Replacement Lamp
The NEC M332XSG lamp is a 270-watt projector lamp module supplied as a fully assembled bulb and housing. It is designed as a direct replacement for the original lamp in compatible NEC projectors so that installation is straightforward. The unit ships new and ready to fit without additional assembly.
Upgrade from a dim or expired original lamp
When the existing lamp reaches the end of its rated life or brightness drops below usable levels, this module restores the projector's output to specification. The change is worth it when image quality has degraded enough to affect presentations or classroom visibility. No other components need to be replaced at the same time.
Rated life of 3,500 hours normal
In normal mode the lamp is rated for 3,500 hours of operation, while economy mode extends the rating to 8,000 hours. This headroom covers extended daily use in meeting rooms or education settings over multiple years. Runtime will decrease if the projector runs continuously at high brightness or in dusty environments without filter maintenance.
Highlights
- Ready-to-install module saves setup time
- 270W Philips DLP bulb delivers bright output
- 3,500 hours normal life reduces replacements
- 8,000 hours economy mode extends intervals
- ISO 9001 manufacturing ensures consistent quality
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 270W |
| Lamp Life | 3,500 (Normal) - 8,000 (Economy) Hrs. |
Questions about this item
Does the NP30LP module include the housing so it fits the NEC M332XSG without extra parts?
Yes, the NP30LP module ships as a fully assembled 270 W bulb inside its housing, ready to slide into the M332XSG projector.
What is the correct reset step after installing the NP30LP lamp that owners often skip?
After fitting the NP30LP module, use the projector menu to reset the lamp-hour counter so the 3 500-hour normal or 8 000-hour economy timers start from zero.
When should the NP30LP lamp be replaced based on the rated hours?
Plan replacement after roughly 3 500 hours in normal mode or 8 000 hours in economy mode, when brightness drops to about half of its initial output.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



