NEC Display Solutions
NEC Display Solutions LT30 220W Projector Lamp
A 220-watt replacement projector lamp module with a 2,000 to 5,000-hour rated life for NEC LT30 projectors
- TypeProjector Lamp
- Wattage220W
- Lamp Life2,000 (Normal) - 5,000 (Economy) Hrs.
- Genuine 220W NSH bulb ensures bright, reliable projection
- Ready-to-install housing saves set-up time
- 2,000 hours normal life reduces replacement frequency
- 5,000 hours economy mode extends operating intervals
- ISO 9001 manufacturing quality assures consistent performance
Genuine NEC LT30 220W replacement module
This lamp module fits NEC LT30 projectors and ships as a complete assembly with a new 220W NSH bulb inside its housing. It is intended for owners who need a direct replacement without sourcing a bare bulb. The unit arrives ready to install.
Replaces a dim or expired original lamp
Swap this module when the existing lamp reaches the end of its rated 2,000 hours in normal mode or 5,000 hours in economy mode. The upgrade is worth it once brightness drops below usable levels or the projector warns of lamp failure. No other components are changed.
Tool-free housing swap in minutes
The pre-assembled housing slides into the projector’s lamp bay and locks without tools. The most common issue is forgetting to reset the lamp-hour counter in the menu after installation, which leaves the replacement warning active. Ensure the projector is cool and unplugged before starting.
Highlights
- Genuine 220W NSH bulb ensures bright, reliable projection
- Ready-to-install housing saves set-up time
- 2,000 hours normal life reduces replacement frequency
- 5,000 hours economy mode extends operating intervals
- ISO 9001 manufacturing quality assures consistent performance
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 220W |
| Lamp Life | 2,000 (Normal) - 5,000 (Economy) Hrs. |
Questions about this item
Does the NEC LT30 lamp module include the housing so it fits straight into the projector?
Yes, the lamp arrives as a fully assembled 220W bulb inside its housing, ready to slot into the NEC LT30 projector without extra parts.
What is the correct way to reset the lamp timer after installing the new 220W module?
After fitting the lamp, power on the projector and use the on-screen menu to reset the lamp-hour counter; skipping this step makes the projector think the old lamp is still in use.
How many hours can I expect from the 220W NSH bulb before it needs replacing?
The lamp is rated for 2,000 hours in normal mode and up to 5,000 hours in economy mode, so plan a replacement when the timer approaches those figures.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
morepartsupply Printhead for Zebra QLn420 P/N P1050667-001
XEROX 113R00719 Cart XER113R00719 Cyan Toner Cartridge 2000 Pages
- 3 lbs



