We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
NEC LT260 projector lamp module with 220W NSH bulb in housing

NEC Display Solutions

NEC Display Solutions LT260 OEM Replacement Projector Lamp 220W 2000 Hrs

SKU CH-6Y1E-0AYT7

A 220 watt replacement lamp module with a 2,000 hour rated life for NEC projectors

  • TypeProjector Lamp
  • Wattage220W
  • Lamp Life2,000 Hrs.
  • Ready-to-install module with 220 W NSH bulb
  • 2,000-hour rated lamp life for extended use
  • OEM-sourced from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita
  • Manufactured under ISO 9001 quality controls
  • Compatible with NEC LT260 projector (model LT60LPK)

Direct replacement module

The NEC LT260 replacement lamp module delivers a new 220W NSH bulb pre-fitted in its housing. It is designed for owners of compatible NEC projectors who need a drop-in unit without separate bulb handling. The lamp is rated for 2000 hours of operation.

Swaps out the original lamp

This module replaces the factory lamp when brightness fades or the hour counter reaches its limit. The change is worth it when image quality drops below usable levels or the projector signals end-of-life. No other components are required for the swap.

Fits existing projector housing

The assembled bulb and housing slide into the projector's lamp compartment using the original mount. It frees the user from aligning a bare bulb or sourcing a separate cage. Installation follows the projector's standard lamp-door procedure.

Highlights

  • Ready-to-install module with 220 W NSH bulb
  • 2,000-hour rated lamp life for extended use
  • OEM-sourced from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita
  • Manufactured under ISO 9001 quality controls
  • Compatible with NEC LT260 projector (model LT60LPK)

Specifications

BrandNEC
TypeProjector Lamp
Wattage220W
Lamp Life2,000 Hrs.

Questions about this item

Does the LT260 lamp module come with the housing already assembled so it fits straight into the projector?

Yes, the LT260 lamp module is supplied as a fully assembled 220 W NSH bulb inside its housing, ready to slide into the compatible NEC projector without extra assembly.

What is the correct sequence for installing the LT260 lamp, and which step is most often missed?

Power off the projector and let it cool, remove the lamp cover, release the retaining screws, pull out the old module, insert the new LT260 unit until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu — the timer reset is the step most frequently forgotten.

When will the LT260 lamp need replacement, and what indicates it is time?

The lamp is rated for 2 000 hours of use; plan replacement when the projector’s lamp-hour counter approaches that figure or when brightness drops noticeably and the replacement indicator illuminates.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.