We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
NEC HT1100 projector lamp module with 220W NSH bulb in housing

NEC Display Solutions

NEC Display Solutions HT1100 projector lamp 220W 2000 Hrs

SKU CH-PCSG-85B0Q

Genuine 220W NSH replacement lamp module with housing, rated for 2000 hours

  • TypeProjector Lamp
  • Wattage220W
  • Lamp Life2,000 Hrs.
  • Genuine NSH bulb delivers 220 W brightness
  • 2000-hour rated life reduces replacement frequency
  • Pre-assembled housing enables quick installation
  • Manufactured to ISO 9001 quality standards
  • Supplied new as direct OEM replacement

Direct replacement for NEC HT1100 projectors

This 220W lamp module is built as a complete bulb-and-housing assembly. It fits the NEC HT1100 projector without extra tools or alignment steps. The unit arrives new and ready for immediate installation.

Replaces the original LT60LPK lamp when brightness

Swapping the module restores factory light output after the previous lamp reaches its 2,000-hour rated life. The change is worth it when the image dims noticeably or the projector signals a lamp warning.

Limited to the 2,000-hour rated lifespan

The NSH 220W bulb is designed for approximately 2,000 hours of typical use. Actual runtime varies with operating mode and environment. The lamp cannot exceed this rated limit and must be replaced again once exhausted.

Highlights

  • Genuine NSH bulb delivers 220 W brightness
  • 2000-hour rated life reduces replacement frequency
  • Pre-assembled housing enables quick installation
  • Manufactured to ISO 9001 quality standards
  • Supplied new as direct OEM replacement

Specifications

BrandNEC
TypeProjector Lamp
Wattage220W
Lamp Life2,000 Hrs.

Questions about this item

Which NEC projector models accept the LT60LPK lamp module?

The LT60LPK module is built for the NEC HT1100 projector and fits the lamp compartment designed for that model.

What is the correct order of steps when installing the LT60LPK lamp, and which step is most often missed?

Power off and unplug the projector, let it cool, remove the lamp cover, release the retaining screws, pull out the old module, insert the new LT60LPK until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu — the timer reset is the step most often forgotten.

After roughly how many hours should the LT60LPK lamp be replaced, and what indicates it is time?

The lamp is rated for 2000 hours; plan replacement when brightness drops noticeably, colours shift, or the projector displays a lamp-warning message.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.