NEC Display Solutions
NEC Display Solutions HT1000 projector lamp 220W 2000 Hrs
220 W replacement lamp module with 2 000-hour rated life for NEC HT1000 projectors
- TypeProjector Lamp
- Wattage220W
- Lamp Life2,000 Hrs.
- Ready-to-install OEM lamp module with 220W NSH bulb
- 2,000-hour rated lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Genuine OEM bulb from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita
- Tested for beam performance, ignition, voltage and run-time
Direct replacement module
The NEC HT1000 projector lamp ships as a complete 220W bulb-and-housing assembly that fits the original projector without extra parts. It is built for owners who need a factory-specification light source to restore brightness and colour accuracy in an existing installation.
Plug-and-play integration
The module slots into the projector’s lamp bay using the original connectors, so no wiring or mounting hardware is required beyond what the chassis already provides. Installers simply remove the old unit, insert the new one and reset the hour counter to resume operation.
Consistent output over rated life
The NSH lamp is tested to ISO9001 benchmarks for ignition stability, voltage regulation and beam uniformity across its 2,000-hour rating. Output decline stays within expected tolerances for the full interval rather than fading sharply after a short burst.
Highlights
- Ready-to-install OEM lamp module with 220W NSH bulb
- 2,000-hour rated lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Genuine OEM bulb from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita
- Tested for beam performance, ignition, voltage and run-time
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 220W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
How many hours of use does the 220 W NSH lamp provide before it needs replacement?
The lamp is rated for 2,000 hours of operation under normal conditions.
What happens to fan noise and heat output when the projector runs continuously with this 220 W lamp installed?
The 220 watt lamp generates significant heat, so the projector’s cooling fans will run at higher speeds and produce noticeable noise during extended use.
Which NEC projector models accept the LT60LPK lamp module so I can confirm it fits the unit I already own?
This module is designed for the NEC HT1000 projector; verify your projector’s model number matches HT1000 before purchasing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



