NEC Display Solutions
NEC Display Solutions 60002852 projector lamp 180W
180 W projector lamp module with 4,000 to 5,000 hour life, supplied as a complete housing for quick installation
- TypeProjector Lamp
- Wattage180W
- Lamp Life4,000 (Normal) - 5,000 (Economy) Hrs.
- Genuine Philips NSH 180W bulb for reliable brightness
- Ready-to-install housing enables quick replacement
- 4,000 hours normal mode extends service interval
- 5,000 hours economy mode reduces operating cost
- Manufactured to ISO 9001 quality standards
Replacement lamp module 60002852
This NEC 60002852 lamp module combines a Philips NSH 180W bulb with its housing in a single unit. It arrives fully assembled for direct installation in compatible NEC projectors without additional tools or alignment steps. The 180 watt rating matches the original specification for consistent brightness and colour performance.
Suited for owners of NEC projectors that specify
Buyers who need a different part number or a bare bulb without housing should look elsewhere. The module is not designed for non-NEC hardware or for projectors that require a higher or lower wattage lamp.
Rated 4000 hours in normal mode
Under sustained daily use the lamp maintains output across its rated life before gradual dimming occurs. Economy mode extends the interval between replacements by reducing power draw and heat stress on the bulb.
Highlights
- Genuine Philips NSH 180W bulb for reliable brightness
- Ready-to-install housing enables quick replacement
- 4,000 hours normal mode extends service interval
- 5,000 hours economy mode reduces operating cost
- Manufactured to ISO 9001 quality standards
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 180W |
| Lamp Life | 4,000 (Normal) - 5,000 (Economy) Hrs. |
Questions about this item
Which NEC projector models accept the 60002852 lamp module?
The 60002852 is a direct replacement lamp module designed for specific NEC projectors; check your projector's manual or the manufacturer's compatibility list to confirm it matches your model before purchasing.
Can I use this 180W lamp in a projector that originally shipped with a different wattage lamp?
No, this 180W lamp must only be used in projectors that specify the 60002852 part number; using a different wattage can cause overheating, ignition failure, or damage to the projector's power supply.
How do I verify the lamp is operating correctly after installation?
After installing the 60002852, reset the projector's lamp timer to zero, then confirm the lamp ignites promptly, displays a stable image without flicker, and the projector reports normal lamp hours counting up from zero.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



