NEC Display Solutions
NEC Display Solutions 60002234 Projector Lamp 330W
A 330 W replacement projector lamp module with a 2,000 to 3,000 hour rated life, supplied as a complete housing for direct installation
- TypeProjector Lamp
- Wattage330W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready to install with pre-assembled bulb and housing
- Bright 330W output from Philips NSH lamp
- Up to 3000 hours life in economy mode
- 2000 hours rated life in normal mode
- Built to ISO 9001 quality standards
Ready-to-install NEC 60002234 lamp module
The NEC 60002234 is a complete 330W projector lamp module supplied with a new Philips NSH bulb already seated in its housing, so it fits straight into compatible NEC projectors without extra assembly. It is intended for venues, classrooms or home cinema owners who need a direct replacement that restores original brightness and colour balance.
ISO 9001 manufacturing and plug-in housing
Each unit is built to ISO 9001 standards and tested for beam performance, ignition, voltage, appearance, connections and run-time before it ships. The pre-assembled housing means the old module slides out and the new one clicks in, minimising downtime and eliminating the risk of mis-aligning a bare bulb during a bulb-only swap.
Replaces a dim or expired 330W module
This lamp restores full output when the existing 330W module has reached the end of its rated 2,000-hour normal or 3,000-hour economy life, or when brightness has faded enough to affect presentations. The jump is worth it when image quality has dropped below acceptable levels; it is not for users who need a different wattage, a bare bulb without housing, or a lamp for a non-NEC projector.
Highlights
- Ready to install with pre-assembled bulb and housing
- Bright 330W output from Philips NSH lamp
- Up to 3000 hours life in economy mode
- 2000 hours rated life in normal mode
- Built to ISO 9001 quality standards
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 330W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
What lamp wattage does the 60002234 module use and what does that mean for brightness?
The module uses a 330W NSH bulb, which determines the light output the projector was designed for; running at the specified wattage maintains the factory brightness and colour balance.
What physical form does the 60002234 arrive in and what must the projector accept?
It ships as a fully assembled bulb-and-housing unit, so the projector only needs to accept the original 60002234 lamp cassette — no separate bulb handling or alignment is required.
How is the 60002234 lamp installed and what step do people often miss?
Power off and cool the projector, open the lamp door, remove the old cassette, insert the new 60002234 module until it seats firmly, close the door, then reset the lamp-hour counter in the menu — skipping the reset makes the projector think the old lamp is still in use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



