NEC Display Solutions
NEC Display Solutions 50029924 130W projector lamp
A complete 130 W lamp module with housing for NEC projectors, rated 2,000 hours normal or 3,000 hours economy
- TypeProjector Lamp
- Wattage130W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready to install with pre-assembled housing
- Bright 130W NSH lamp for clear projection
- Up to 2,000 hours normal or 3,000 hours economy life
- Genuine NEC 50029924 OEM replacement part
- Manufactured to ISO 9001 quality standards
Direct Replacement Lamp
The NEC 50029924 is a 130W projector lamp module supplied as a fully assembled bulb and housing. It is designed for NEC projector owners who need a straightforward, ready-to-install replacement when the original lamp reaches end of life.
Restores Original Brightness
This lamp replaces a depleted NSH bulb and returns the projector to its factory light output. The change is worth it when the existing lamp has dimmed significantly or the projector indicates replacement after approximately 2000 hours in normal mode or 3000 hours in economy mode.
Check Projector Compatibility
Before ordering, confirm that your NEC projector model accepts the 50029924 part number. The module is manufactured to ISO9001 standards and undergoes quality checks for beam performance, ignition, voltage, connections and run-time, so it fits and functions as the original did.
Highlights
- Ready to install with pre-assembled housing
- Bright 130W NSH lamp for clear projection
- Up to 2,000 hours normal or 3,000 hours economy life
- Genuine NEC 50029924 OEM replacement part
- Manufactured to ISO 9001 quality standards
Specifications
| Brand | NEC |
|---|---|
| Type | Projector Lamp |
| Wattage | 130W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
What projector models accept the NEC 50029924 lamp module?
The 50029924 lamp module is designed as a direct replacement for NEC projectors that specify this part number; consult your projector manual to confirm compatibility before purchase.
How is the lamp installed, and what step is commonly missed?
Power off and unplug the projector, allow it to cool completely, remove the lamp cover, slide out the old module, insert the new 50029924 housing until it clicks, replace the cover, then reset the lamp timer in the projector menu — the timer reset is the step most often forgotten.
When will the 130W NSH bulb need replacement?
Expect roughly 2000 hours in normal mode or 3000 hours in economy mode before brightness drops to half; the projector will typically show a replacement warning as the limit approaches.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



