We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue cryogenic bib apron, 24 by 42 inches, nylon Taslan PTFE fabric, adjustable quick-disconnect straps

NATIONAL SAFETY APPAREL INC

NATIONAL SAFETY APPAREL INC A02CR24I42IC 24" X 42" Cryogenic Bib Apron personal protective equipment

SKU CH-177H-TNGTH MPN A02CR24I42IC

Cryogenic bib apron protects to -300 °F with EN 511 Level 2 contact and Level 3 convective cold ratings, adjustable quick-disconnect straps and water-resistant Nylon Taslan/PTFE fabric weighing 10.6

  • MaterialNylon Taslan/PTFE
  • Protects down to -300 °F with EN 511 Level 2 contact cold rating
  • EN 511 Level 3 convective cold performance for extreme low-temperature work
  • Quick-disconnect buckles on neck and waist allow fast donning and doffing
  • Breakaway design releases under tension to reduce entanglement risk
  • Water-resistant Nylon Taslan/PTFE fabric at 10.6 oz weight sheds liquid splashes

Cryogenic Bib Apron for Extreme Cold

The National Safety Apparel A02CR24I42IC is a 24" by 42" bib apron built for cryogenic environments. It uses a Nylon Taslan and PTFE shell rated to a minimum temperature of -300 Degrees F. Adjustable neck and waist straps with quick disconnects allow rapid donning and doffing. The open-back design adds ventilation during extended wear.

Thermal Protection and Wear Comfort

The apron meets EN 511 standards with Contact Cold Performance Level 2 and Convective Cold Performance Level 3. Fabric weight is 10.6 oz, providing a balance of insulation and mobility. Water-resistant construction sheds liquid splashes common in cryogenic handling. Universal sizing and breakaway features accommodate a range of body types without restricting movement.

Sustained Exposure and Safety Release

Under prolonged cryogenic contact the material maintains its protective ratings without stiffening. Breakaway buckles at the neck and waist release instantly if the apron snags on equipment, reducing entanglement risk. Quick-disconnect straps enable fast removal if the wearer becomes saturated. The open back prevents heat buildup during long shifts in cold storage or transfer operations.

Highlights

  • Protects down to -300 °F with EN 511 Level 2 contact cold rating
  • EN 511 Level 3 convective cold performance for extreme low-temperature work
  • Quick-disconnect buckles on neck and waist allow fast donning and doffing
  • Breakaway design releases under tension to reduce entanglement risk
  • Water-resistant Nylon Taslan/PTFE fabric at 10.6 oz weight sheds liquid splashes

Specifications

BrandNational Safety Apparel Inc
ModelA02CR24I42IC
MaterialNylon Taslan/PTFE

Questions about this item

How do I fasten the adjustable neck and waist straps with quick disconnects on this cryogenic bib apron?

Connect the quick-disconnect buckles at the neck and waist, then pull the straps snug so the apron hangs evenly; the breakaway feature will release if the apron snags on equipment.

When should I replace the Nylon Taslan/PTFE material on this apron?

Replace it when the blue fabric shows cuts, abrasion, delamination or stiffness after cryogenic exposure, or if water no longer beads on the surface.

What is the lowest temperature this apron can withstand before its cold protection degrades?

The minimum temperature rating is -300 °F; EN 511 contact cold level 2 and convective cold level 3 apply down to that limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.