Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00941498BTC
In stock
National
National #212 Zinc Small Screw Eye 10 Pack
Pack of 10 steel screw eyes with zinc finish, 15/16 in overall length and 3/16 in inside eye diameter
- FinishZinc
- MaterialSteel
- Selling UnitPack
- 10-pack convenience for multiple installations
- Zinc finish resists corrosion on steel base
- Small #212 size fits light-duty hardware needs
- 3/16 in. inside eye diameter accepts thin cord
- 15/16 in. overall length suits shallow mounting
National #212 Zinc Small Screw Eye
The National #212 zinc small screw eye comes in a 10 pack for light-duty fastening tasks. It suits homeowners and DIYers who need reliable hardware for cords, wires or light chains. Each piece is manufactured from steel with a zinc finish for corrosion resistance. The pack provides enough units for multiple installation points around the home.
Steel construction with zinc finish
The steel body gives the screw eye structural strength for everyday loads. A zinc coating protects the metal against rust in indoor or sheltered outdoor locations. The threaded shank cuts into wood or pilot holes without requiring specialised tools. This hardware installs quickly with a screwdriver or by hand for simple mounting jobs.
3/16 inch inside eye diameter
The inside eye diameter measures 3/16 inch, which determines the maximum thickness of rope, wire or hook that will pass through. Buyers needing a larger eye for heavier chain or thicker cable should select a different size. The thread length is 7/16 inch and overall length is 15/16 inch for shallow engagement. Verify these dimensions match the intended application before purchase.
Highlights
- 10-pack convenience for multiple installations
- Zinc finish resists corrosion on steel base
- Small #212 size fits light-duty hardware needs
- 3/16 in. inside eye diameter accepts thin cord
- 15/16 in. overall length suits shallow mounting
Specifications
| Finish | Zinc |
|---|---|
| Brand | NATIONAL |
| Material | Steel |
| Selling Unit | Pack |
Questions about this item
What is the wire diameter of the #212 screw eye?
The wire diameter is 0.105 inches, which determines the load capacity and pilot hole size needed for installation.
What are the eye and thread dimensions for mounting?
The inside eye diameter is 3/16 inch and the thread length is 7/16 inch, requiring a matching pilot hole and sufficient material thickness for full engagement.
How do I install these screw eyes correctly?
Drill a pilot hole slightly smaller than 0.105 inches, then turn the screw eye by hand or with pliers on the eye until the threads are fully seated at 7/16 inch depth.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
