NaSR
NaSR Single Monitor Arm Gas Spring 32" 19.8 lbs C-Clamp Grommet Silver
Gas-spring monitor arm holds 17 to 32 inch screens up to 19.8 lbs with full tilt, swivel and rotation adjustment
- Improves posture by raising the monitor to eye level
- Fits screens from 17" to 32" with 75x75mm and 100x100mm VESA
- Gas spring arm extends and retracts with 180° swivel
- Monitor head tilts 90°, swivels 180° and rotates 360°
- Supports up to 19.8lbs while freeing desk space
Ergonomic Desk Mount
This single monitor arm raises screens to eye level for office workers and home users who want better posture and more desk space. The gas-spring mechanism supports displays from 17 to 32 inches weighing up to 19.8 lbs. It attaches via C-clamp or grommet base to fit most tables.
VESA 75x75 and 100x100 Compatibility
The mount accepts monitors with 75x75mm or 100x100mm mounting holes, which is the specification that decides fit. Screens outside the 17 to 32 inch range or heavier than 19.8 lbs are not supported.
Straightforward Installation with Cable Routing
The arm ships with both mounting bases and standard hardware for quick assembly. Gas-spring tension may need adjustment for very light or heavy panels, and the 180-degree arm swivel can contact nearby walls if the desk is flush against them.
Highlights
- Improves posture by raising the monitor to eye level
- Fits screens from 17" to 32" with 75x75mm and 100x100mm VESA
- Gas spring arm extends and retracts with 180° swivel
- Monitor head tilts 90°, swivels 180° and rotates 360°
- Supports up to 19.8lbs while freeing desk space
Specifications
No published specifications for this item yet.
Questions about this item
How much weight can the 19.8 lbs gas spring actually hold when the arm is fully extended?
The spring supports monitors up to 19.8 lbs across the full extension range; heavier screens will cause the arm to droop.
Which VESA patterns does the 75x75mm and 100x100mm mount accept, and what screw length is needed?
It accepts both 75 mm and 100 mm square patterns; use M4 screws 8–10 mm long for a secure fit.
What desk thickness does the C-clamp and grommet base accommodate?
The C-clamp fits desks up to 80 mm thick and the grommet requires a 10–80 mm hole through the surface.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



