We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium gas-spring monitor arm with desk clamp and grommet base, articulated joints visible

NaSR

NaSR Single Monitor Arm Gas Spring 17-32" 19.8lbs professional video device

SKU CH-B5VT-ZERSG

Gas-spring arm holds 17–32 in monitors up to 19.8 lbs with full tilt, swivel, rotate and height adjustment, plus C-clamp or grommet mounting

  • Fits 17 to 32 inch screens up to 19.8 lbs with 75x75mm and 100x100mm VESA
  • Gas spring arm extends and retracts for ergonomic positioning with 180 degree swivel
  • Monitor head tilts 90 degrees up or down, swivels 180 degrees and rotates 360 degrees
  • Height adjustment raises display to eye level reducing neck and eye strain
  • Dual mounting options: C-clamp for 0.39 to 3.14 inch desks or grommet for up to 2.16 inch thickness

Single Monitor Arm 17-32 Inch

This new NaSR gas-spring arm fits LCD and LED monitors from 17 to 32 inches weighing up to 19.8 lbs. It attaches to 75x75 mm or 100x100 mm VESA patterns and suits home-office workers, creative professionals and streamers who need flexible screen positioning.

Thermals Noise Power

A mechanical gas-spring arm has no fans, no electronics and no power draw, so it runs completely silent and adds no heat to the desk. Aluminium construction dissipates any ambient warmth passively, leaving thermals and acoustics unchanged in normal use.

Mount Compatibility Decides Fit

The arm only works when the monitor provides 75x75 mm or 100x100 mm mounting holes and weighs 19.8 lbs or less; heavier panels or non-VESA backs cannot be used. The C-clamp fits desks 0.39 to 3.14 inches thick while the grommet base requires a hole in surfaces up to 2.16 inches thick.

Highlights

  • Fits 17 to 32 inch screens up to 19.8 lbs with 75x75mm and 100x100mm VESA
  • Gas spring arm extends and retracts for ergonomic positioning with 180 degree swivel
  • Monitor head tilts 90 degrees up or down, swivels 180 degrees and rotates 360 degrees
  • Height adjustment raises display to eye level reducing neck and eye strain
  • Dual mounting options: C-clamp for 0.39 to 3.14 inch desks or grommet for up to 2.16 inch thickness

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the NaSR gas-spring arm using the C-clamp, and what step do people often miss?

Clamp the base to a desk edge between .39 and 3.14 inches thick, then tighten both clamp bolts evenly; the step most users miss is confirming the monitor's VESA plate uses 75x75mm or 100x100mm holes before mounting the screen.

What maintenance will this monitor arm need over time?

Periodically check the gas-spring tension and re-tighten the pivot bolts at the arm joints and monitor head; no lubrication is required on the aluminum arm or the 180-degree swivel points.

What is the first limit I will hit if I keep a heavy monitor at full extension all day?

The 19.8 lb weight rating is the first constraint; exceeding it causes the gas spring to sag and the arm to lose its +90°/-90° tilt and 360° rotation stability.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.