NaSR
NaSR Single Monitor Arm 17-32" 19.8 lbs Gas Spring Black
Gas-spring arm holds 17–32 in screens up to 19.8 lbs with 75×75 mm or 100×100 mm VESA, tilts ±90°, swivels 180°, rotates 360°, and clamps 0.39–3.14 in or grommets up to 2.16 in thick desks
- Fits 17-32" screens up to 19.8 lbs with 75x75mm and 100x100mm VESA
- Gas spring arm extends and retracts for precise ergonomic positioning
- Arm swivels 180° each way; head tilts 90°, swivels 180°, rotates 360°
- Raises monitor to eye level to reduce neck and eye strain
- Mounts via C-clamp (0.39-3.14") or grommet (up to 2.16" thick)
Single monitor arm 17 to 32 inch
The NaSR single monitor arm fits LCD and LED screens from 17 to 32 inches and supports up to 19.8 lbs using 75x75mm and 100x100mm VESA holes. A high-grade aluminium gas spring lets you extend and retract the arm to your preferred ergonomic position. The arm swivels through 180 degrees in either direction while the monitor head tilts 90 degrees up or down, swivels 180 degrees and rotates 360 degrees. Height adjustment raises the display to eye level for comfortable viewing.
Dual mounting options C clamp and grommet
Installation uses either a C-clamp or a grommet base, both included. The C-clamp secures to desks between .39 and 3.14 inches thick, while the grommet fits surfaces up to 2.16 inches thick. No extra brackets or adapters are required, so setup is straightforward on most tables. The aluminium construction keeps the arm rigid during adjustment without adding bulk.
Suited for single-screen setups needing full motion
This arm serves users who want one monitor on a fully articulated mount with both clamp and grommet flexibility. It does not suit buyers needing dual or triple monitor configurations, screens larger than 32 inches, or displays heavier than 19.8 lbs. Builders with desks thicker than 3.14 inches for clamp mounting or 2.16 inches for grommet mounting should look at other mounting solutions.
Highlights
- Fits 17-32" screens up to 19.8 lbs with 75x75mm and 100x100mm VESA
- Gas spring arm extends and retracts for precise ergonomic positioning
- Arm swivels 180° each way; head tilts 90°, swivels 180°, rotates 360°
- Raises monitor to eye level to reduce neck and eye strain
- Mounts via C-clamp (0.39-3.14") or grommet (up to 2.16" thick)
Specifications
No published specifications for this item yet.
Questions about this item
Will the gas spring on this arm need replacement after heavy daily use?
The gas spring is built into the high-grade aluminum arm and has no user-serviceable parts; if it loses tension the entire arm would need replacing.
What stops the arm from holding position when a 19.8 lb monitor is fully extended?
The 19.8 lb weight limit is the maximum the gas spring can counterbalance; exceeding it or extending the arm fully at that weight will cause drift.
Does the arm make any audible noise or transmit vibration when the monitor is rotated 360° all day?
The arm uses a sealed gas spring with no fan or motor, so operation is silent and vibration-free during 360° rotation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



