We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium gas-spring monitor arm with C-clamp and grommet base

NaSR

NaSR Gas Spring Monitor Arm 32" 19.8lb Silver

SKU CH-3NHR-2ZNYD

A gas-spring arm holds 17–32″ monitors up to 19.8 lb, tilts ±90°, swivels 180°, rotates 360°, and mounts via C-clamp (.39–3.14″) or grommet (≤2.16″)

  • Supports 17 to 32 inch screens up to 19.8lbs
  • Gas spring arm extends and retracts for ergonomic positioning
  • Arm swivels 180 degrees and head tilts 90 degrees
  • C-clamp fits desks 0.39 to 3.14 inches thick
  • Grommet mount works on desks under 2.16 inches thick

Single-Arm Mount for 17–32 Inch Screens

The NaSR gas-spring arm holds one LCD or LED monitor from 17 to 32 inches weighing up to 19.8 lbs. It attaches via 75x75 mm or 100x100 mm VESA holes. The aluminium construction suits home-office workers, streamers and traders who need a single screen at eye level. It is not for users who want dual-monitor setups or screens larger than 32 inches.

C-Clamp or Grommet Fit on Desks Up to 3.14 Inches

Installation uses either a C-clamp for desks 0.39 to 3.14 inches thick or a grommet base for surfaces under 2.16 inches. Both brackets ship in the box. The most common issue is forgetting to tighten the tension bolt after positioning the arm, which lets the monitor drift. Clear the area behind the desk so the arm can swing its full 180 degree range without hitting a wall.

Gas Spring Holds Position Through All-Day

The internal gas spring counterbalances the monitor weight so the arm stays where you leave it during repeated tilt, swivel and height changes. Tilt runs +90 to -90 degrees, head swivel covers 180 degrees and rotation reaches 360 degrees. The mechanism is rated for continuous daily movement rather than occasional repositioning only. It is not a fixed post, so users who never move their screen once set may prefer a static riser.

Highlights

  • Supports 17 to 32 inch screens up to 19.8lbs
  • Gas spring arm extends and retracts for ergonomic positioning
  • Arm swivels 180 degrees and head tilts 90 degrees
  • C-clamp fits desks 0.39 to 3.14 inches thick
  • Grommet mount works on desks under 2.16 inches thick

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the gas-spring tension is correct for my 19.8lb monitor after mounting?

Raise and lower the arm; it should hold the screen at any height without drifting. The head must stay fixed when tilted ±90°, swivelled 180° or rotated 360°.

What mounting hardware is included and what must I supply?

The box contains the aluminium arm, VESA 75×75 mm and 100×100 mm brackets, a C-clamp for desks 0.39–3.14 in thick and a grommet base for desks under 2.16 in. You provide only a compatible 17–32 in monitor.

Which VESA pattern — 75 mm or 100 mm — should I choose for my display?

Check the back of your monitor; use whichever pattern matches its four mounting holes. Both 75×75 mm and 100×100 mm brackets are supplied, so either works.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.