NaSR
NaSR Adjustable Arm Desk Mount Single Monitor Arm professional video device
Gas-spring arm holds 17–32″ monitors up to 19.8 lbs with full tilt, swivel and 360° rotation, clamping to desks .39–3.14″ thick
- Reduces fatigue by finding the perfect ergonomic angle
- Fits 17 to 32 inch screens up to 19.8 lbs with 75x75 and 100x100 VESA
- Gas spring arm extends, swivels 180 degrees, tilts 90 degrees, rotates 360 degrees
- Frees desk space with compact clamp or grommet base
- Raises monitor to eye level for comfortable viewing posture
Single Monitor Arm 17–32 Inch
The NaSR adjustable arm desk mount holds one screen from 17 to 32 inches weighing up to 19.8 lbs. It attaches to 75x75 mm or 100x100 mm VESA patterns. The gas-spring arm suits home offices, streaming setups and professional video workstations where ergonomic positioning matters.
C-Clamp and Grommet Install
Two mounting options ship in the box: a C-clamp for desks 0.39 to 3.14 inches thick and a grommet base for surfaces under 2.16 inches. Installation is straightforward with basic tools. The main issue installers meet is insufficient desk thickness or missing clearance behind the surface for the clamp or grommet bolt.
Gas Spring Range and Limits
The arm extends, retracts and swivels 180 degrees each way. The monitor head tilts 90 degrees up or down, swivels 180 degrees and rotates 360 degrees. This range covers most seated and standing eye-level positions. Heavier panels near the 19.8 lb limit may need occasional tension adjustment, and ultra-wide or curved models beyond 32 inches are not supported.
Highlights
- Reduces fatigue by finding the perfect ergonomic angle
- Fits 17 to 32 inch screens up to 19.8 lbs with 75x75 and 100x100 VESA
- Gas spring arm extends, swivels 180 degrees, tilts 90 degrees, rotates 360 degrees
- Frees desk space with compact clamp or grommet base
- Raises monitor to eye level for comfortable viewing posture
Specifications
No published specifications for this item yet.
Questions about this item
How do I verify the gas spring arm is holding my monitor at the correct height after installation?
The arm should keep the screen steady at any height within its range without drifting; the monitor head will stay fixed at the tilt angle you set between +90° and -90°.
What mounting hardware is included and what must I supply?
The package includes both a C-clamp for desks 0.39 to 3.14 inches thick and a grommet base for desks up to 2.16 inches thick; you only need a monitor with 75x75mm or 100x100mm VESA holes.
Which VESA pattern matches a 32 inch screen near the 19.8 lb limit?
Both 75x75mm and 100x100mm patterns are supported up to the full 19.8 lb capacity, so use whichever pattern your monitor provides.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



