NASHUA
NASHUA 307 Duct Tape 48 mm × 55 m 7 mil Black
General-purpose duct tape with polyethylene-coated cloth backing and rubber adhesive, 48 mm wide by 55 m long, rated from 40 °F to 200 °F
- ColorBlack
- Withstands 40 °F to 200 °F extremes
- 48 mm wide roll covers broad seams
- 55 m continuous length reduces splice points
- 7 mil polyethylene cloth resists tears and abrasion
- Rubber adhesive bonds to metal, plastic and fabric
NASHUA 307 Duct Tape 48 mm × 55 m
This black duct tape uses a polyethylene coated cloth backing with rubber adhesive. It is supplied as a continuous roll measuring 48 mm wide by 55 m long. The tape thickness is 7 mil. It is designed for general purpose assembly, manufacturing, construction, maintenance, repair and metalworking tasks.
Suits indoor and outdoor jobs needing a durable
The tape performs between 40 and 200 degrees F. Buyers who need a tape rated outside this temperature range should look elsewhere. It is not intended for specialised HVAC sealing that requires specific code compliance or a different adhesive formulation.
Check the surface is clean and dry for best adhesion
Verify the operating temperature of the application stays within the 40 to 200 degrees F limits. Confirm the 48 mm width and 55 m length match the project requirements. The roll is a continuous length without pre-cut sections.
Highlights
- Withstands 40 °F to 200 °F extremes
- 48 mm wide roll covers broad seams
- 55 m continuous length reduces splice points
- 7 mil polyethylene cloth resists tears and abrasion
- Rubber adhesive bonds to metal, plastic and fabric
Specifications
| Brand | NASHUA |
|---|---|
| Color | Black |
Questions about this item
What surface temperature range can the 307 tape withstand once applied?
The 307 duct tape performs continuously between 40 and 200 degrees Fahrenheit, so the surface must stay within that range for the adhesive to hold.
Will the 48 mm width match the duct seams I already have?
The roll is 48 mm wide, which equals 1 7/8 inches, a standard size for many rectangular duct joints and wrap repairs.
How do I confirm the 7 mil backing is holding after I wrap a joint?
Press the polyethylene coated cloth firmly; the rubber adhesive should bond instantly with no gaps or curling edges visible along the 55 metre roll length.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
KINGSOM 907 Cordless Soldering Iron Kit 2-in-1 Corded Wireless 8s Heating 260-450°C 500-842°F
- Residential
Portable Soldering Iron USB-C Rechargeable 510 Thread 3-Level Temperature Black
- Residential



