NANK Clip Super2 Open Ear Earbuds Bluetooth 6.0 30H
Open-ear clip earbuds with Bluetooth 6.0, 30-hour playtime and 11 mm drivers
- TypeOn-Ear
- ColorBlack
- Driver Unit11 millimeters
- Frequency Response5Hz-20KHz
- THDOn Ear
- Input Impedance16 ohms
- Lightweight 4.8 g earbuds with flexible C-clip for all-day comfort
- Open-ear design keeps surroundings audible while delivering sound
- 11 mm NanoBass driver with Omni-SSA engine for deep bass
- AI call tech and DS3.0 directional audio cut noise and leakage
- Bluetooth 6.0 multipoint links two devices with stable 32 ft range
Lightweight Open-Ear Clip Earbuds
Weighing 4.8 g each, the C-clip design uses a flexible memory bridge that adapts to different ear shapes for a secure, non-slip fit. The open-ear architecture leaves the ear canal unblocked so users stay aware of surroundings during commutes, office work or outdoor exercise. Bluetooth 6.0 provides fast pairing, low latency and stable connectivity up to 32 feet.
30-Hour Total Playtime with USB-C Charging
Each charge delivers up to 8 hours at 50 % volume and the case extends total listening to 30 hours. A full recharge takes 1.5 hours via the included USB-C cable. High volume or frequent calls will reduce per-charge runtime, so heavy users may need a mid-day top-up.
Bluetooth 6.0 Multipoint Connection
Dual-device pairing lets you link a phone and laptop simultaneously and switch audio sources without re-pairing. The 11 mm NanoBass driver and Omni-SSA 2.0 engine produce a 5 Hz–20 kHz frequency response with 95 dB sensitivity and SNR. AI call processing and DS3.0 directional audio reduce wind noise and sound leakage for clearer conversations.
Highlights
- Lightweight 4.8 g earbuds with flexible C-clip for all-day comfort
- Open-ear design keeps surroundings audible while delivering sound
- 11 mm NanoBass driver with Omni-SSA engine for deep bass
- AI call tech and DS3.0 directional audio cut noise and leakage
- Bluetooth 6.0 multipoint links two devices with stable 32 ft range
Specifications
| Brand | NANK |
|---|---|
| Model | Clip Super2 |
| Type | On-Ear |
| Color | Black |
| Driver Unit | 11 millimeters |
| Frequency Response | 5Hz-20KHz |
| THD | On Ear |
| Input Impedance | 16 ohms |
| Signal to Noise Ratio(SNR) | 95 decibels |
| Power Supply | cell, true |
| Sensitivity | 95 decibels |
| Ear Coupling | open_ear |
| Cord Length | 1 x USB-C Data Cable |
| Noise Cancelling | Active |
| Wireless Type | Bluetooth |
| Charge Time | 1.5 hours |
| Distance | 32 feet |
| Contains Embedded Battery | cell |
| Microphone Impedance | 16 ohm |
| Microphone Frequency Response | 20Hz-20KHz |
| Microphone Signal to Noise Ratio(SNR) | 95 decibels |
| Microphone Sensitivity | 95 decibels |
| Features | active_noise_cancellation, 6, Touch Control, touch, Wireless, On Ear, bass_driver, 16 ohm, 32 feet, 1 x Clip Super2 Earbuds |
| Package Contents | 1 x Clip Super2 Earbuds, 1 x Charging Case, 1 x USB-C Data Cable, User Manual |
Questions about this item
Will the 4.8 g clip design stay secure if I wear it with my existing over-ear headphones?
Each earbud weighs 4.8 g and uses a flexible C-flex memory bridge that adapts to the ear for a non-slip fit, so it remains stable even when worn alongside other headgear.
How can I confirm the Bluetooth 6.0 multipoint link is active after pairing two devices?
After pairing the first device, disable its Bluetooth, pair the second device, then re-enable the first; both connections will stay active for seamless switching.
Does the box include a wall charger or only the USB-C data cable listed?
The package contains the earbuds, a charging case, and one USB-C data cable; a separate USB power adapter is not included and must be purchased if you do not already have one.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sony ZX Series MDR-ZX110AP Wired On-Ear Headphones White 30mm 3.5mm
- Headphone
usbroway 10-pack VHF Antenna 136-174MHz for Motorola HT1000 MTS2000 XTS2500 XTS3000 XTS3500
- Two-way Radio



