We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two matte black DDR5 memory modules in dual channel kit

NAKAMICHI

NAKAMICHI F5-6000J3038F16GX2-TZ5N 2 in 1 accessory

SKU CH-JHH2-9DGT8 MPN F5-6000J3038F16GX2-TZ5N

32 GB DDR5 dual-channel kit running at 6000 MT/s with CL30-38-38-96 timings at 1.35 V for AMD Ryzen 7000 and X670 platforms

  • 32 GB capacity with two 16 GB modules
  • DDR5-6000 speed for high-performance overclocking
  • CL30-38-38-96 timings at 1.35 V
  • AMD EXPO profile on Ryzen 7000 CPUs
  • Dual-channel 288-pin kit for X670 platforms

Kit composition and target platform

This is a 32 GB DDR5 kit built from two 16 GB modules. It is intended for desktop systems using AMD Ryzen 7000 Series processors on X670 chipset motherboards. Builders seeking high-frequency memory for overclocking or gaming workloads will find the rated specifications match that platform.

Behaviour under sustained load

The kit operates at 6000 MT/s with timings of 30-38-38-96 at 1.35 V when the AMD EXPO profile is enabled in the BIOS. Without the profile active the modules run at standard SPD speeds. Stability at the rated EXPO frequency depends on the specific motherboard and CPU combination used.

Compatibility checks before ordering

Verify that your motherboard supports AMD EXPO and that the CPU memory controller can sustain 6000 MT/s. The kit uses 288-pin UDIMM modules and requires a dual-channel capable board. Systems without EXPO support or with older Ryzen generations will not reach the rated overclock speed.

Highlights

  • 32 GB capacity with two 16 GB modules
  • DDR5-6000 speed for high-performance overclocking
  • CL30-38-38-96 timings at 1.35 V
  • AMD EXPO profile on Ryzen 7000 CPUs
  • Dual-channel 288-pin kit for X670 platforms

Specifications

No published specifications for this item yet.

Questions about this item

How much power does the 1.35 V DDR5 kit draw when running all day at 6000 MT/s?

The modules are rated at 1.35 V; actual power draw depends on the motherboard and CPU combination used with the kit.

What platform is required for the EXPO profile to reach 6000 MT/s CL30?

An AMD X670 series chipset with a Ryzen 7000 series CPU or newer is needed to enable the EXPO overclock profile.

Will the 288-pin UDIMM modules fit in a motherboard that only supports 288-pin DDR5 slots?

Yes, the kit uses the standard 288-pin DDR5 UDIMM form factor compatible with desktop DDR5 motherboards.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.