We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact TFX power supply unit with metal casing and 80mm fan grille

myVolts

myVolts TFX Power Supply 420W HP s5703w S5716F

SKU CH-EDV3-CP4H1

TFX form-factor power supply delivering 420 W to replace 200–350 W units in HP s5703w and S5716F desktops with 20+4 pin, 4-pin CPU, Molex, floppy and SATA connectors

  • TypeAT
  • Replaces lower-wattage units with 420 W output
  • Fits HP s5703w and S5716F slimline chassis
  • 20+4 pin, 4-pin CPU, 3× Molex, floppy, 3× SATA connectors
  • 80 mm double ball-bearing fan for reliable cooling
  • Accepts 100–240 V input for worldwide use

TFX upgrade for HP Slimline

The myVolts TFX power supply replaces the original unit in HP s5703w and S5716F desktops. It delivers 420 W output, upgrading systems that shipped with 200 W to 400 W units. The AT-type design fits slimline and small-form-factor chassis. It is built for owners of those specific HP models who need more headroom for added components.

80 mm double ball-bearing fan cooling

An 80 mm fan with double ball bearings handles thermal management during normal operation. The unit accepts 100/240 V input, allowing worldwide use without a voltage switch. Power draw scales with the connected load up to the 420 W rating. No noise-level or efficiency figures are provided by the supplier.

20+4 pin, 4-pin CPU, three SATA, three Molex, floppy

The cable set includes a 20+4 pin motherboard connector, a 4-pin CPU connector, three SATA power plugs, three Molex plugs and a floppy connector. This mix supports legacy and current drives in the target HP systems. No modular cables, software utilities or extra mounting hardware are mentioned in the specifications.

Highlights

  • Replaces lower-wattage units with 420 W output
  • Fits HP s5703w and S5716F slimline chassis
  • 20+4 pin, 4-pin CPU, 3× Molex, floppy, 3× SATA connectors
  • 80 mm double ball-bearing fan for reliable cooling
  • Accepts 100–240 V input for worldwide use

Specifications

TypeAT

Questions about this item

How do I install this TFX power supply in my HP s5703w, and which connector step is often missed?

Fit the unit into the slimline chassis, secure it with screws, then attach the 20+4 pin motherboard plug, the 4-pin CPU plug, three SATA leads, three Molex leads and the floppy connector; the 4-pin CPU plug is the one most often forgotten.

What maintenance will this 420 W TFX unit need over time?

The 80 mm double ball-bearing fan is the only moving part; clean dust from its intake and exhaust vents every few months to keep airflow steady.

What limit appears first when this supply runs at high load for long periods?

The 420 W total output ceiling is reached before any single rail limit, so sustained draws above that wattage will trigger protection shutdown.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.