myVolts
myVolts Replacement Battery for JBL Xtreme 2 5200mAh 7.4V
5200 mAh 7.4 V lithium-ion replacement battery for JBL Xtreme 2 speaker, 38.48 Wh capacity with decoded chip
- 5200 mAh capacity powers the JBL Xtreme 2 for extended playtime
- 4 V lithium-ion cell matches the original voltage specification
- 48 Wh energy rating meets the speaker’s factory requirement
- 5 x 40 x 21 mm form factor fits the battery compartment exactly
- CE, RoHS and ISO 9001 certifications confirm safety and quality compliance
High-capacity Li-ion speaker battery
This 5200mAh lithium-ion replacement delivers 38.48Wh at 7.4V for the JBL Xtreme 2 speaker. A fully decoded chip ensures the battery communicates with the device exactly like the original pack. The unit weighs 220g and measures 138.50 x 40.00 x 21.00mm. It carries ISO9001, RoHS and CE certifications.
Simple swap with part-number verification
Installation consists of opening the speaker compartment, disconnecting the old pack and connecting the new one using the existing wiring. The critical step is confirming that your original battery carries the part number 2INR19 66-2 or SUN-INTE-103 before ordering. A mismatch will prevent the pack from fitting or communicating with the speaker electronics.
Check model and part number before ordering
Verify that your speaker is a JBL Xtreme 2, XTREME2BLKAM or XTREME2BLUAM and that the original battery label shows 2INR19 66-2 or SUN-INTE-103. If the model name or part number differs, this pack will not be compatible. Contact the supplier with photos if you are uncertain about the correct match.
Highlights
- 5200 mAh capacity powers the JBL Xtreme 2 for extended playtime
- 4 V lithium-ion cell matches the original voltage specification
- 48 Wh energy rating meets the speaker’s factory requirement
- 5 x 40 x 21 mm form factor fits the battery compartment exactly
- CE, RoHS and ISO 9001 certifications confirm safety and quality compliance
Specifications
No published specifications for this item yet.
Questions about this item
How do I verify the replacement battery is working correctly after installing it in my JBL Xtreme 2?
After installation, the speaker should power on normally, hold a charge for the expected playback time, and the battery indicator should display the charge level accurately. The new fully decoded chip works just like the original.
What comes in the box and what must I source separately for this JBL Xtreme 2 replacement battery?
The box contains the 5200mAh 7.4V Li-ion replacement battery weighing 220g. No tools, adhesives, or additional cables are included; you may need a small screwdriver set to open the speaker enclosure for installation.
Which battery version matches my speaker — 2INR19 66-2 or SUN-INTE-103?
Both part numbers are listed as compatible with JBL Xtreme 2, XTREME2BLKAM, and XTREME2BLUAM models. Match the part number printed on your original battery to either 2INR19 66-2 or SUN-INTE-103 before ordering.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



