We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver metal 1U server power supply unit with rear fan grille and multiple cable connectors

myVolts

myVolts FSP270 60LE 1U server power supply 270W

SKU CH-RAGG-X837D MPN FSP270

Delivers 270 W to 1U servers, NAS units and ITX builds with 20+4-pin ATX and 4-pin CPU connectors plus two peripheral leads

  • Delivers 270W rated power for stable server operation
  • Accepts AC 100 to 240V input for worldwide use
  • 20+4 pin and 4 pin CPU connectors support standard motherboards
  • Mesh-free heat dissipation design improves airflow and cooling efficiency
  • Premium metal construction provides durable 1U form factor

Server Power Supply 270W

The myVolts FSP270 60LE is a 1U form-factor server power supply rated at 270W. It accepts AC input from 100 to 240V at 50 to 60Hz and delivers power through a 20+4 pin motherboard connector and a 4 pin CPU connector. Two additional peripheral interfaces and two IDE interfaces are included for drive connectivity. The unit ships new in a metal housing with cables approximately 15.7in long.

Suits compact servers and embedded builds

This supply fits 1U rack chassis, ITX cases, NAS enclosures, all-in-one units, cash registers and routers where a 270W budget is sufficient. Builders needing higher wattage for multi-GPU configurations or additional drive bays should look elsewhere. The fixed cable set and 1U depth also limit use in full-height towers that expect modular cabling or ATX dimensions.

20+4 pin and 4 pin CPU connectors decide fit

The motherboard connector combines a 20 pin block with a detachable 4 pin section, while the CPU connector is a single 4 pin plug. Verify that the target board uses this exact pairing; boards requiring an 8 pin EPS connector or a 24 pin fixed block will not connect without an adapter.

Highlights

  • Delivers 270W rated power for stable server operation
  • Accepts AC 100 to 240V input for worldwide use
  • 20+4 pin and 4 pin CPU connectors support standard motherboards
  • Mesh-free heat dissipation design improves airflow and cooling efficiency
  • Premium metal construction provides durable 1U form factor

Specifications

No published specifications for this item yet.

Questions about this item

What does the 20+4Pin motherboard connector and 4Pin CPU connector support on this 270W unit?

The 20+4Pin motherboard connector and 4Pin CPU connector deliver stable power to the board and processor, while two additional interfaces and two IDE interfaces provide peripheral connectivity.

What are the physical mounting requirements for this 1U server power supply?

This 1U form-factor unit is built from premium metal and fits standard 1U server bays, making it suitable for all-in-one machines, cash registers, routers, NAS servers, ITX small cases and other compact equipment.

How is the FSP270 60LE installed, and what step is often missed?

Connect the AC input rated at 100 to 240V, 5 to 3A, 50 to 60Hz, then attach the 20+4Pin motherboard, 4Pin CPU, two extra interfaces and two IDE cables; the step often missed is verifying every connector seats fully before powering on.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.