We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small cylindrical encoder with silver metal body and 2m cable

myVolts

myVolts E6B2-CWZ6C Incremental Encoder 38mm 100P/R 2m Cable

SKU CH-6B86-KAKZ2 MPN E6B2-CWZ6C

A 38mm incremental encoder delivering 100 pulses per rotation with a 2m cable and DC5-26V supply range

  • TypeAT
  • 38 mm diameter fits tight machine spaces
  • 100 pulses per revolution gives precise position feedback
  • ASIC internals resist electrical noise for reliable signals
  • 2 metre cable reaches distant controllers without splices
  • DC 5‑26 V supply range suits common industrial power rails

Compact Encoder for Motion Feedback

The myVolts E6B2-CWZ6C is a 38 mm incremental encoder built for position and speed feedback in automation systems. It suits engineers integrating motion control into machinery where a small, robust sensor is required.

Stable Output Over Extended Runs

Internal ASIC devices give strong anti-interference performance so signal quality holds during continuous operation. Load short-circuit protection and power-supply reverse-wiring protection prevent damage from wiring faults that can appear after long cable pulls.

Metal Housing With 2 m Cable

An alloy shell and aluminium body resist impact while the stainless-steel spindle handles 30 N radial and 20 N thrust loads. The 2 m flying lead uses colour-coded wires for DC 5–26 V supply and A, B, Z phase outputs, simplifying panel wiring. Builders needing hollow-shaft or higher-resolution variants should look elsewhere.

Highlights

  • 38 mm diameter fits tight machine spaces
  • 100 pulses per revolution gives precise position feedback
  • ASIC internals resist electrical noise for reliable signals
  • 2 metre cable reaches distant controllers without splices
  • DC 5‑26 V supply range suits common industrial power rails

Specifications

TypeAT

Questions about this item

How much heat or power does the E6B2-CWZ6C draw when running continuously on a 24 V supply?

The encoder operates from DC 5 to 26 V open-collector output and includes load short-circuit and reverse-wiring protection, so continuous operation stays within those voltage limits without extra cooling.

What mating connector or cable does the buyer need to attach to the 2 m flying-lead cable?

The 2 m cable ends in colour-coded flying leads — brown for DC 5-26 V, blue for 0 V, black for A phase, white for B phase, orange for Z phase, and shield for ground — so you only need terminals or a connector block that matches your controller.

Will the 6 mm shaft and 38 mm body fit the mounting pattern on my older Omron E6B2-CWZ6C replacement?

Yes — the encoder has a 38 mm outer diameter, 6 mm thrust shaft diameter, 30 N radial and 20 N axial load ratings, and the same A, B, Z phase outputs, making it a direct mechanical and electrical drop-in for that legacy model.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.