myVolts
myVolts 65W AC Adapter for Dell Latitude 13 3000 3301 3310 2-in-1
65W charger for Dell Latitude 13 3000, 3301 and 3310 models with dual 4.5mm and 7.4mm tips
- 65W output powers compatible Dell Latitude models
- 100-240V input works worldwide without a voltage converter
- Dual 4.5mm and 7.4mm tips fit two barrel sizes
- Includes conversion cable for broader Dell 65W compatibility
- 45W compatible for lower-power Latitude 13 3000 series
Compatible Dell Latitude Models
This 65-watt AC adapter fits Dell Latitude 13 3000 series laptops including the 3301, 3310 and 3310 2-in-1. It replaces Dell part numbers P114G, P114G001, P118G001 and P95G002. The unit delivers 19.5 volts at 3.34 amps and accepts a universal 100 to 240 volt input at 50 to 60 hertz.
Thermals and Power Draw
Rated at 65 watts with 45-watt compatibility, the adapter draws up to 1.6 amps from the mains supply. Normal operation stays within the specified input range of 100 to 240 volts at 50 to 60 hertz. No active cooling is mentioned in the specifications.
Dual Connector and Included Cable
A 4.5 by 3.0 millimetre connector is fitted to the power cord and a 7.4 by 5.0 millimetre conversion cable is bundled. The small connector plugs directly into compatible ports; attaching the conversion cable allows the larger connector to be used. One adapter, one power cord and one conversion cable are supplied.
Highlights
- 65W output powers compatible Dell Latitude models
- 100-240V input works worldwide without a voltage converter
- Dual 4.5mm and 7.4mm tips fit two barrel sizes
- Includes conversion cable for broader Dell 65W compatibility
- 45W compatible for lower-power Latitude 13 3000 series
Specifications
No published specifications for this item yet.
Questions about this item
How do I attach the 4.5*3.0mm tip or the 7.4*5.0mm conversion cable to charge my Dell Latitude 3310?
Plug the 4.5*3.0mm connector straight in if the port matches; otherwise snap the 4.5*3.0mm end into the supplied conversion cable to create the 7.4*5.0mm tip, then insert that into the laptop.
Which parts of this 65W adapter kit are likely to wear out first and need replacing?
The detachable 4.5*3.0mm power cord and the 7.4*5.0mm conversion cable see repeated bending at the strain reliefs, so they typically fail before the sealed 65W brick.
What thermal or electrical limit appears first when the adapter runs at full 65W load for long periods?
The 19.5V 3.34A output rating is the hard ceiling; sustained loads at or above 65W will hit that current limit and trigger the brick’s internal protection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



