We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular 65W AC adapter with 5.5mm 1.7mm barrel tip and magnetic loop

myVolts

myVolts 65W AC Adapter 19V 3.42A 5.5mm 1.7mm

SKU CH-GTMY-8P2GA

65W 19V 3.42A AC adapter with 5.5mm 1.7mm tip, overload and short-circuit protection, and magnetic loop for compatible Acer monitors

  • 65 W output powers compatible Acer monitors reliably
  • 19 V 3.42 A delivery matches original adapter specifications
  • 5 mm × 1.7 mm tip fits listed models exactly
  • Overload short-circuit and under-voltage protection safeguards equipment
  • 3 × 0.75 mm² pure-copper cable resists wear and leakage

Purpose & fit

This 65W AC adapter delivers 19V at 3.42A through a 5.5mm by 1.7mm barrel connector. It replaces Acer monitor power supplies with part numbers such as ADP-40KD, ADS-65AL-19-3 and PA-1051-91 across the S2, H2 and G2 series.

Thermals, noise & power

The unit accepts 100-240V AC input and provides overload, short-circuit, under-voltage and zero-voltage protection. A magnetic loop suppresses electromagnetic fields for stable operation. Pure copper conductors rated at 3 x 0.75 square mm reduce resistance and heat during continuous use.

Deciding specification

The 5.5mm by 1.7mm tip size and 19V 3.42A output determine compatibility; monitors requiring a different voltage, current or connector diameter cannot use this adapter. Buyers needing a higher wattage unit or a different barrel dimension should select another model.

Highlights

  • 65 W output powers compatible Acer monitors reliably
  • 19 V 3.42 A delivery matches original adapter specifications
  • 5 mm × 1.7 mm tip fits listed models exactly
  • Overload short-circuit and under-voltage protection safeguards equipment
  • 3 × 0.75 mm² pure-copper cable resists wear and leakage

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 5.5mm * 1.7mm barrel tip to my Acer monitor?

Plug the DC connector firmly into the monitor's power port until it seats flush; the 1:1 design matches the original ADP-40KD BB and ADS-65AL-19-3 pin geometry so no adapter is needed.

What part of the cable or adapter wears out first and needs replacing?

The DC cord uses 3 x 0.75 square mm pure copper conductors; the magnetic loop and thicker jacket reduce fatigue, but the barrel tip sees the most insertions and will eventually need a new adapter.

At what load does the overload protection trip during continuous operation?

The unit delivers 19V at 3.42A for 65W maximum; sustained loads above that level activate overload, short-circuit and under-voltage safeguards to shut the output down safely.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.