myVolts
myVolts 65W AC Adapter 18.5V 3.5A 7.4*5.0mm HP Compaq Pavilion ProBook
A 65W laptop charger delivering 18.5V at 3.5A with a 7.4mm by 5.0mm connector for HP Pavilion, Compaq Presario and ProBook models
- Powers HP laptops worldwide with 100-240V input
- Delivers 65W at 18.5V 3.5A for reliable charging
- Fits 7.4*5.0mm connector on compatible HP models
- Certified CE FCC RoHS for safe operation
- Replaces many HP part numbers including 391172-001 and PA-1650-02HC
65W AC Adapter 18.5V 3.5A 7.4*5.0mm
This 65W AC adapter delivers 18.5V at 3.5A through a 7.4mm by 5.0mm connector. It accepts 100-240V 50-60Hz input and carries CE, FCC and RoHS certification. The unit replaces HP part numbers including PPP009H, PPP009L, 584037-001 and PA-1650-02HC.
HP Pavilion, Compaq Presario and ProBook owners
It suits owners of HP Pavilion G4, G6, G7, DV3, DV4, DV5, DV6, DV7, DM1 and DM4 series notebooks. It also fits Compaq Presario CQ40, CQ50, CQ60, CQ61, CQ70 and HP 2000 series models. Buyers whose laptops require a different voltage, amperage or connector size should look elsewhere.
Connector size 7.4mm by 5.0mm
The barrel plug measures 7.4mm outer diameter by 5.0mm inner diameter. This single dimension decides whether the adapter will physically mate with the laptop power jack. Verify the measurement against the original charger before ordering.
Highlights
- Powers HP laptops worldwide with 100-240V input
- Delivers 65W at 18.5V 3.5A for reliable charging
- Fits 7.4*5.0mm connector on compatible HP models
- Certified CE FCC RoHS for safe operation
- Replaces many HP part numbers including 391172-001 and PA-1650-02HC
Specifications
No published specifications for this item yet.
Questions about this item
What connector size does the 65W adapter use for HP Pavilion and ProBook models?
The adapter uses a 7.4mm by 5.0mm connector, matching the DC jack on compatible HP Pavilion and ProBook laptops.
How do you install the 3-prong AC adapter, and what step is often missed?
Plug the 3-prong IEC cable into the adapter brick, connect the 7.4mm tip to the laptop, then plug the mains lead into a 100-240V outlet; the step often missed is seating the barrel tip fully until it clicks.
When will the 65W 18.5V 3.5A adapter need replacement?
Replace the adapter if the output drops below 18.5V 3.5A, the cable frays near the 7.4mm connector, or the brick overheats during normal 65W charging.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



