myVolts
myVolts 44W Surface Charger with USB Port
44 W AC adapter with magnetic Surface connector and extra 7.5 W USB port charges laptop and phone together
- Charge Surface and phone together via extra 5 V 1.5 A USB port
- 44 W 15 V 2.58 A output matches 44 W 65 W 36 W 24 W originals
- Built-in IC gives overload short-circuit and heat protection
- 2 m cable and magnetic tip tested for secure fit
- 100-240 V 50/60 Hz input works worldwide
44W Surface Charger with USB Port
The myVolts charger delivers 15V at 2.58A for compatible Microsoft Surface laptops and tablets. An extra USB port supplies 5V at 1.5A to charge a phone or accessory simultaneously. It replaces original 24W, 36W, 44W and 65W power supplies across the listed Surface models.
Magnetic connector and dual-voltage output
Built-in IC protection guards against overload, short circuit and heat during daily use. The magnetic tip is tested for a tight fit and the cable ends are reinforced to resist fraying after repeated bending. A 1.2m power cord and 1.2m output cable give flexible desk placement.
15V 2.58A output matches 44W and 65W originals
This unit covers devices requiring 15V at 1.6A, 2.58A or 4A, including Surface Pro 3 through 7, Pro X, Laptop 1 to 3, Book 1 and 2, and Go 1 and 2. It will not power devices that need a different voltage or a higher current than 2.58A on the main output.
Highlights
- Charge Surface and phone together via extra 5 V 1.5 A USB port
- 44 W 15 V 2.58 A output matches 44 W 65 W 36 W 24 W originals
- Built-in IC gives overload short-circuit and heat protection
- 2 m cable and magnetic tip tested for secure fit
- 100-240 V 50/60 Hz input works worldwide
Specifications
No published specifications for this item yet.
Questions about this item
What output does the 15 V / 2.58 A barrel connector actually deliver?
The barrel connector supplies 15 V at 2.58 A for 44 W total, matching the original 44 W and 65 W Surface chargers it replaces.
How much space does the adapter brick occupy on a desk or power strip?
The brick measures 11 cm long, 5.5 cm wide and 3 cm high, with a 1.2 m DC cable and a separate 1.2 m AC cord.
What is the correct order to connect the charger so the magnetic tip seats properly?
Plug the AC cord into the brick, then into the wall, then attach the magnetic tip to the Surface — connecting the tip before mains power can prevent a firm magnetic lock.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



