myVolts
myVolts 200W 19.5V 10.3A 4.5*3.0mm AC Adapter
200W 19.5V 10.3A AC adapter with 4.5*3.0mm blue-tip connector for HP OMEN and ZBook mobile workstations
- Delivers 200W power for demanding HP workstations
- Universal 100-240V input enables worldwide use
- 5*3.0mm blue-tip connector fits listed ZBook and Pavilion models
- CE certified with multiple safety protections built in
- Includes AC adapter and US power cord in box
Replacement AC adapter for HP workstations
This 200W adapter supplies 19.5V at 10.3A through a 4.5*3.0mm blue-tip barrel connector with a central pin. It is built for HP ZBook 15 and 17 mobile workstations from the G3, G4 and G5 series, plus Pavilion Gaming 15-cx models that require the same plug and wattage. The unit accepts 100-240V input at 50-60Hz for worldwide use and includes a US three-prong power cord.
Upgrades from lower-wattage chargers
If the original charger was rated below 200W, this unit removes the power ceiling that can throttle CPU and GPU performance under sustained load. The jump is worth it when the laptop draws near the full 200W during rendering, compilation or gaming sessions. It will not fit devices that use the larger 7.4*5.0mm connector, so verify the port before ordering.
Limited to barrel-connector charging
The adapter delivers power only through its fixed 4.5*3.0mm DC plug; it cannot charge via USB-C or any other interface. Maximum output is capped at 200W, so systems that demand more power will not be fully supported. The package includes the adapter and a detachable AC cord, with no additional cables or tips provided.
Highlights
- Delivers 200W power for demanding HP workstations
- Universal 100-240V input enables worldwide use
- 5*3.0mm blue-tip connector fits listed ZBook and Pavilion models
- CE certified with multiple safety protections built in
- Includes AC adapter and US power cord in box
Specifications
No published specifications for this item yet.
Questions about this item
What size DC plug does this adapter use?
The DC plug measures 4.5 * 3.0 mm with a blue tip and a central pin inside. It will not fit the larger 7.4 * 5.0 mm connector found on some other HP models.
How do I connect the AC adapter to the mains supply?
Use the supplied 3-prong US power cord. Plug the cord into the adapter's inlet, then into a 100-240 V 50-60 Hz wall socket. The step people miss is seating the cord fully into the adapter before switching on.
When should I replace the power cord?
Replace the cord if the insulation is cracked, the plug pins are bent, or the connection becomes intermittent. The adapter itself carries a 12-month warranty.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



