myVolts
myVolts 180W 19.5V 9.23A ac adapter
180W AC adapter delivering 19.5V at 9.23A with a 7.4mm by 5.0mm connector for compatible Dell Alienware, Precision, Latitude and OptiPlex models
- Delivers 180W power for demanding Dell laptops
- Wide 100-240VAC input suits global travel use
- 4mm x 5.0mm connector fits listed Alienware and Precision models
- Replaces Dell part numbers including DA180PM111 and 74X5J
- Includes power cord for immediate setup
180W 19.5V Dell AC Adapter
This 180 watt adapter delivers 19.5 volts at 9.23 amps through a 7.4 mm by 5.0 mm barrel connector. It includes the AC power cord and is built to match Dell part numbers such as DA180PM111 and 74X5J. The unit supports a 100 to 240 VAC input range for worldwide use.
Fits Alienware Precision and Latitude
Buyers replacing a failed Dell 180 watt brick for listed Alienware, Precision mobile workstation or Latitude models will find a direct fit. Systems that require a different voltage, a higher wattage or a connector size other than 7.4 mm by 5.0 mm cannot use this adapter.
7.4 mm x 5.0 mm barrel connector
The connector diameter is the single specification that decides fit; it must match the laptop's power jack exactly. If the original charger uses a different tip diameter or a USB-C power port this unit will not connect.
Highlights
- Delivers 180W power for demanding Dell laptops
- Wide 100-240VAC input suits global travel use
- 4mm x 5.0mm connector fits listed Alienware and Precision models
- Replaces Dell part numbers including DA180PM111 and 74X5J
- Includes power cord for immediate setup
Specifications
No published specifications for this item yet.
Questions about this item
Should I choose the 180W model or a lower-wattage adapter for my Dell Precision 7510?
The Precision 7510 is listed as compatible with this 180W unit; a lower-wattage adapter may not supply enough power for full performance or charging under load.
What does the 19.5V 9.23A output mean when the adapter is connected to my laptop?
It delivers up to 180W at 19.5V, so the laptop can draw the current it needs up to 9.23A for charging and full-speed operation.
Will the 7.4mm × 5.0mm barrel connector fit the power port on my Alienware 15 R2?
Yes, the 7.4mm by 5.0mm connector matches the Alienware 15 R2 charging port used with the DA180PM111 and 74X5J part numbers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



