myVolts
myVolts 130W AC Power Adapter 19.5V 6.7A 5.0mm*7.4mm
130W AC adapter delivering 19.5V 6.7A via a 5.0mm x 7.4mm connector for compatible Dell Precision, Vostro, XPS, Inspiron and Latitude laptops
- 130 W output powers demanding Dell laptops
- 5 V 6.7 A delivery matches original charger specs
- 0 mm × 7.4 mm connector fits listed Precision, XPS, Inspiron, Latitude, Vostro models
- AC 100–240 V input works on mains worldwide
- Replaces Dell part numbers 330-1829, 330-1830, X408G, D232H, DA130PE1-00
130 W Dell AC Adapter
This 130 watt AC power adapter delivers 19.5 V at 6.7 A through a 5.0 mm by 7.4 mm barrel connector. It accepts a worldwide 100 to 240 V input and uses a three-prong mains plug. The unit replaces Dell part numbers such as DA130PE1-00 and 330-1829 across a wide range of Precision, XPS, Inspiron, Vostro and Latitude laptops.
Who this fits and who it does not
Owners of the listed Dell models who need a direct 130 W replacement with the 5.0 mm by 7.4 mm tip will find this adapter compatible. Buyers whose laptop requires a different voltage, a higher wattage or a different connector size cannot use this unit. Laptops that charge via USB-C or a proprietary slim-tip are also not supported.
Deciding specification — connector and wattage
The critical match is the 5.0 mm by 7.4 mm barrel connector combined with 130 W output at 19.5 V 6.7 A. If the original charger shows the same tip dimensions and the same power rating, this adapter will fit and supply the correct power. A different tip size or a lower wattage rating means the part is not suitable.
Highlights
- 130 W output powers demanding Dell laptops
- 5 V 6.7 A delivery matches original charger specs
- 0 mm × 7.4 mm connector fits listed Precision, XPS, Inspiron, Latitude, Vostro models
- AC 100–240 V input works on mains worldwide
- Replaces Dell part numbers 330-1829, 330-1830, X408G, D232H, DA130PE1-00
Specifications
No published specifications for this item yet.
Questions about this item
Do I need a three-prong mains lead for the 130W adapter?
Yes, the adapter has a three-prong inlet and requires a standard IEC C13 mains cable rated for at least 130W.
Will the 5.0mm by 7.4mm tip fit my older Dell Precision M6300?
The M6300 is listed as compatible, so the 5.0mm by 7.4mm connector should mate correctly with its DC jack.
How can I verify the adapter is delivering 19.5V at 6.7A after plugging it in?
Check the laptop battery icon — it should show charging and the BIOS power section should report a 130W / 19.5V 6.7A source.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



