We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight cast copper trap adapter with cup and slip joint ends

Mueller Industries, Inc.

Mueller Industries STREAMLINE 11356 Trap Adapter Cast Brass 1-1/2 CxSJ

SKU CH-54AB-1JQDS

A cast-copper trap adapter joining 1-1/2-inch copper tube to a slip-joint connection, rated to 408 psi at 100°F and 250°F maximum temperature

  • ColorTransparent
  • TypePipes, Valves & Fittings
  • Cast brass construction resists corrosion for long service life
  • Straight adapter joins 1-1/2 inch copper tube to slip-joint fitting
  • Rated to 408 psi at 100 °F for reliable non-potable water connections
  • Withstands temperatures up to 250 °F without deformation
  • Precleaned status noted for installer preparation awareness

STREAMLINE 11356 Trap Adapter

The STREAMLINE 11356 is a cast brass trap adapter designed for non-potable water applications. It connects a 1-1/2 inch copper tube cup joint to a 1-1/2 inch slip joint in a straight configuration.

Verify copper tube and slip joint dimensions

Confirm your existing drain line uses 1-1/2 inch copper tubing with a 1-5/8 inch outer diameter on the cup side. The slip joint side requires a 1-1/2 inch outer diameter tube for a proper seal.

Rated for 408 psi at 100 degrees F

The fitting withstands a maximum operating pressure of 408 psi at 100 degrees F and a maximum temperature of 250 degrees F. Cast brass construction provides durability for standard drainage installations.

Highlights

  • Cast brass construction resists corrosion for long service life
  • Straight adapter joins 1-1/2 inch copper tube to slip-joint fitting
  • Rated to 408 psi at 100 °F for reliable non-potable water connections
  • Withstands temperatures up to 250 °F without deformation
  • Precleaned status noted for installer preparation awareness

Specifications

BrandSTREAMLINE
ColorTransparent
TypePipes, Valves & Fittings

Questions about this item

What comes in the box and do I need any extra parts to install the 11356 trap adapter?

The box contains the cast brass adapter only; you must supply slip-joint nuts, washers and any pipe or tubing required for the connection.

Which version of the 11356 should I choose for a 1-1/2 inch copper tube to slip-joint connection?

The 11356 is a single straight adapter with a 1-1/2 inch copper cup on one end and a 1-1/2 inch slip-joint on the other, so no alternate version is needed.

How does the 408 psi at 100 °F rating affect everyday use on a standard drain line?

The 408 psi at 100 °F rating far exceeds typical residential drain pressures, so the adapter will handle normal hot-water discharge up to 250 °F without issue.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.