We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled copper tubing 3/4 in OD 60 ft length K type

Mueller Industries, Inc.

Mueller Industries KS05060 Trap 3/4 in OD 60 ft Length K Type

SKU CH-6F2N-YF9V0 MPN KS05060

Seamless copper coil tubing, 60 ft length, 3/4 in outside diameter, K type for potable water systems

  • TypeDrain Components
  • 60 ft coil simplifies long runs without joints
  • K-type wall rated for 589 psi at 200 °F
  • NSF/ANSI 61 and NSF 372 certified for potable water
  • Seamless C12200 copper resists corrosion and scaling
  • Soft temper allows hand bending around obstacles

Product Identity

The Mueller Industries KS05060 is a 60 ft coil of seamless copper tubing built for potable water systems. It meets ASTM B88 and NSF/ANSI/CAN 61 standards for safe drinking water supply. The Type K wall provides a 0.049 in thickness with a 0.625 in inside diameter. This soft temper coil suits installers needing long, continuous runs without joints.

Thermals and Pressure

The tubing withstands a maximum operating pressure of 589 psi at 200 degrees F and a maximum operating temperature of 400 degrees F. Copper construction handles thermal cycling in hot and cold water lines without degradation. No coating or cap is applied, leaving the C12200 alloy surface exposed for standard solder or braze connections.

Deciding Specification

The critical measure is the 3/4 in outside diameter paired with Type K wall thickness for 5/8 in copper tube size. This dimension set determines fitting compatibility and code compliance for the intended service. Buyers who need a different tube size, wall type or length must select another product.

Highlights

  • 60 ft coil simplifies long runs without joints
  • K-type wall rated for 589 psi at 200 °F
  • NSF/ANSI 61 and NSF 372 certified for potable water
  • Seamless C12200 copper resists corrosion and scaling
  • Soft temper allows hand bending around obstacles

Specifications

TypeDrain Components
BrandMueller Industries
ModelKS05060

Questions about this item

How do I install the 60 ft coil of 3/4 in OD K-type copper tubing and what step do people often miss?

Unroll the soft temper coil slowly to avoid kinks, cut to length with a tubing cutter, deburr the inside diameter of .625 in, clean both ends, then solder or press-connect; the step most often missed is thorough deburring, which blocks flow and weakens joints.

What maintenance or replacement will the C12200 copper tubing need over time?

The seamless C12200 copper resists corrosion in potable water systems meeting NSF/ANSI/CAN 61 and NSF 372; inspect joints periodically for green patina or pinholes, flush if water chemistry changes, and replace only damaged sections rather than the full 60 ft coil.

What is the first limit that appears when the tubing runs at sustained pressure and temperature?

The maximum operating pressure of 589 psi at 200 Degrees F is the primary design limit; sustained exposure above 400 Degrees F or pressures exceeding 589 psi will degrade the soft temper wall thickness of .049 in before other factors become critical.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.