We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled copper tubing, 7/8 inch outside diameter, 100 foot length, shiny metallic finish

Mueller Industries, Inc.

Mueller Industries, Inc. LS06100 7/8" OD 100 ft Coil Copper Tubing Type L

SKU CH-SHM6-5CN5N MPN LS06100

A 100 ft coil of 7/8 in OD Type L copper tubing rated to 582 psi for water lines from 100 °F to 400 °F

  • TypeDrain Components
  • Type L copper handles 582 psi for reliable water lines
  • Soft coil bends easily for faster installation
  • 100 ft length reduces joints on long runs
  • Meets ASTM B280 B306 B819 B88 standards
  • Withstands 100 to 400 °F for hot and cold systems

Copper Tubing Type L 100 ft Coil

This 100 ft coil of Type L copper tubing is built for water supply and distribution systems. It meets ASTM B280, ASTM B306, ASTM B819 and ASTM B88 standards for plumbing installations. The soft temper allows bending without special tools for faster routing through walls and floors.

Suited for residential and commercial water lines

Installers who need a continuous 100 ft run without joints will appreciate the coil format. The 0.75 in inside diameter supports standard 3/4 in nominal sizing for typical service lines. Projects requiring rigid straight lengths or refrigerant-grade ACR tubing should select a different product.

582 psi maximum pressure rating

The 0.045 in wall thickness yields a 582 psi pressure rating at the listed temperature range of 100 to 400 degrees F. This single figure determines whether the tubing satisfies local code requirements for the intended water service pressure.

Highlights

  • Type L copper handles 582 psi for reliable water lines
  • Soft coil bends easily for faster installation
  • 100 ft length reduces joints on long runs
  • Meets ASTM B280 B306 B819 B88 standards
  • Withstands 100 to 400 °F for hot and cold systems

Specifications

TypeDrain Components
BrandMueller Industries
ModelLS06100

Questions about this item

How do I uncoil and install the 100 ft Type L copper tubing without kinking the .045 in wall?

Straighten the coil gradually by hand, supporting the full length. Use a tubing cutter for clean cuts and flare or sweat fittings rated for 582 psi. Avoid sharp bends; the soft temper kinks easily if forced.

What maintenance will the bare copper tubing need over time in a water system?

Inspect joints annually for green corrosion or pitting. Flush the line if water sits stagnant. The tube has no coating, so water chemistry and oxygen exposure determine service life.

At what temperature does the 7/8 in OD tubing reach its 582 psi pressure limit?

The rating holds up to 400 °F. Above that temperature the allowable working pressure drops, so sustained high‑heat use reduces the safe pressure ceiling first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.