We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight copper tube, seamless, hard temper, 2 ft length

Mueller Industries, Inc.

Mueller Industries, Inc. LH10002 Copper Tube Type L 1 1/8 in OD 2 ft

SKU CH-XWVP-1RFGE MPN LH10002

Straight copper tube, Type L, 1 1/8 in outside diameter, 2 ft length, seamless C12200 alloy rated to 395 psi at 200 °F and certified to ASTM B88, NSF 372 and NSF/ANSI/CAN 61

  • TypeDrain Components
  • Seamless copper resists leaks and corrosion
  • Type L wall handles 395 psi at 200 °F
  • Meets ASTM B88 and NSF 61 for potable water
  • Hard-drawn temper keeps shape during bending
  • Two-foot straight length installs without joints

Copper Type L Tubing for Potable Water

This 2 ft length of seamless copper tubing meets ASTM B88 and NSF/ANSI/CAN 61 standards for potable water systems. It is manufactured from C12200 grade copper with a hard temper and a 0.05 in wall thickness. The 1 1/8 in outside diameter matches 1 in copper tube size Type L specifications. Rated for 395 psi at 200 Degrees F with a maximum operating temperature of 400 Degrees F.

Verify System Pressure and Fitting Compatibility

Confirm that your plumbing system operates within the 395 psi pressure rating at elevated temperatures. Ensure existing fittings and joining methods are approved for 1 1/8 in OD hard-temper copper tubing. Check local code requirements for Type L copper in the intended application before installation.

Replaces Thinner Wall or Non-Certified Tubing

This Type L wall upgrades from Type M or uncertified tubing where higher pressure ratings or code compliance are required. The NSF 372 and NSF/ANSI/CAN 61 certifications make it suitable for potable water lines where lesser materials are not permitted. The jump is worth it when system pressure approaches 395 psi or inspection demands listed standards.

Highlights

  • Seamless copper resists leaks and corrosion
  • Type L wall handles 395 psi at 200 °F
  • Meets ASTM B88 and NSF 61 for potable water
  • Hard-drawn temper keeps shape during bending
  • Two-foot straight length installs without joints

Specifications

TypeDrain Components
BrandMueller Industries
ModelLH10002

Questions about this item

Does the tube arrive with end caps or must I cap the 1 1/8 in OD ends myself?

The tubing is supplied cleaned but not capped, so you will need to fit your own caps or fittings on the 1 1/8 in outside diameter ends.

The listing shows only the 2 ft length — is that the only size available for this Type L copper tube?

The product data lists a single 2 ft straight length of 1 in copper tube size Type L with 0.05 in wall thickness; other lengths or types are not included in this item.

What does the 395 psi at 200 °F pressure rating mean for a typical hot-water installation?

It certifies the seamless C12200 copper tube to ASTM B88 and NSF/ANSI/CAN 61 for continuous service up to 395 psi at 200 °F, covering standard residential hot-water pressures and temperatures.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.