We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight copper tube, 3/4 in OD, 2 ft length

Mueller Industries, Inc.

Mueller Industries, Inc. LH05002 3/4 in OD 2 ft Copper Trap

SKU CH-284N-55KXV MPN LH05002

Straight seamless copper tube, 3/4 in outside diameter and 2 ft long, rated to 505 psi at 200 degrees F for potable water systems

  • TypeDrain Components
  • Seamless copper construction eliminates leak paths
  • Hard-drawn temper resists kinking during bending
  • NSF 61 and NSF 372 certified for potable water
  • Rated 505 psi at 200 °F for high-pressure supply lines
  • 2 ft straight length of 3/4 in OD Type L tube

Copper tubing for potable water systems

This 2 ft length of seamless copper tubing meets ASTM B88, NSF 372 and NSF/ANSI/CAN 61 standards for drinking water installations. The 3/4 in outside diameter and 0.625 in inside diameter suit standard 5/8 in copper tube size Type L fittings. Hard temper C12200 copper provides structural rigidity for exposed runs.

Seamless construction with hard temper

Seamless fabrication eliminates longitudinal welds that can leak under thermal cycling. Hard temper resists bending during handling, so the tube holds its alignment when pressed through joists or wall plates. The 0.042 in wall thickness withstands 505 psi at 200 Degrees F and continuous exposure up to 400 Degrees F without annealing.

3/4 in OD straight length for Type L fittings

The outside diameter matches 5/8 in CTS Type L dimensions, so it accepts standard wrot-copper or flared fittings without adapters. Supplied as a straight 2 ft stick, it is intended for short offsets, repairs or test assemblies rather than long continuous runs.

Highlights

  • Seamless copper construction eliminates leak paths
  • Hard-drawn temper resists kinking during bending
  • NSF 61 and NSF 372 certified for potable water
  • Rated 505 psi at 200 °F for high-pressure supply lines
  • 2 ft straight length of 3/4 in OD Type L tube

Specifications

TypeDrain Components
BrandMueller Industries
ModelLH05002

Questions about this item

What does the ASTM B88 standard cover for this 3/4 in OD copper tube?

ASTM B88 defines the dimensions, tolerances and material requirements for seamless copper water tube, confirming this Type L tube meets recognised plumbing specifications.

What minimum clearance is needed to accommodate the 3/4 in outside diameter and 2 ft straight length?

Allow at least 3/4 in clearance around the tube circumference and a straight run of 2 ft plus fitting engagement depth for proper alignment.

How do you join this hard-temper seamless copper tube without kinking it?

Cut square, deburr inside and out, clean with emery cloth, apply flux, then solder using lead-free alloy; the hard temper resists bending so form any offsets before assembly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.