We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight copper tube, 5/8 inch OD, 2 ft length, Type L, seamless, hard temper

Mueller Industries, Inc.

Mueller Industries, Inc. LH04002 Copper Trap 5/8 in OD 2 ft Type L

SKU CH-TRG5-8EVBM MPN LH04002

Straight copper tube, 5/8 in outside diameter by 2 ft long, Type L for potable water systems

  • TypeDrain Components
  • Seamless copper tubing resists leaks with ASTM B88 construction
  • Hard-drawn C12200 copper withstands 577 psi at 200°F
  • NSF 372 and NSF/ANSI/CAN 61 certified for potable water
  • 1/2 in copper tube size fits standard fittings precisely
  • Two-foot straight length simplifies installation in tight runs

Copper Type L Tubing 5/8 in OD

This straight copper tubing meets ASTM B88 and NSF standards for potable water supply. The seamless C12200 alloy construction provides reliable corrosion resistance in residential and commercial plumbing installations. Hard temper ensures the tube holds its shape during bending and fitting.

Fits 1/2 in Nominal Copper Systems

The 5/8 in outside diameter matches standard 1/2 in copper tube size for sweat or compression connections. Two-foot straight lengths reduce the number of joints required in a run. No cleaning or capping is performed at the factory, so ends should be prepared before assembly.

Rated 577 psi at 200 Degrees F

The tube withstands continuous pressure up to 577 psi at 200 °F and temperatures up to 400 °F. Wall thickness of .04 in maintains structural integrity under sustained thermal cycling. NSF/ANSI/CAN 61 certification confirms suitability for drinking water contact over long service periods.

Highlights

  • Seamless copper tubing resists leaks with ASTM B88 construction
  • Hard-drawn C12200 copper withstands 577 psi at 200°F
  • NSF 372 and NSF/ANSI/CAN 61 certified for potable water
  • 1/2 in copper tube size fits standard fittings precisely
  • Two-foot straight length simplifies installation in tight runs

Specifications

TypeDrain Components
BrandMueller Industries
ModelLH04002

Questions about this item

Will the 0.04 in wall thickness handle 577 psi continuously at 200 Degrees F?

Yes. The tube is rated for a maximum operating pressure of 577 psi at 200 Degrees F per ASTM B88, so the wall thickness is designed for that sustained load.

Does the copper tubing itself generate noise or heat when water runs through it all day?

The copper material does not generate noise or heat; any sound or temperature rise comes from the fluid moving inside, not from the tubing.

What fittings must I already have to connect this 5/8 in OD Type L tube?

You need fittings sized for 1/2 in copper tube size (5/8 in OD) such as sweat, compression or press connectors compatible with Type L copper.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.