We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight copper tube, half inch outside diameter, five foot length

Mueller Industries, Inc.

Mueller Industries, Inc. LH03005 1/2 in OD 5 ft copper trap

SKU CH-D9XT-54P97 MPN LH03005

Straight 1/2 in OD copper tube, 5 ft long, Type L seamless C12200 rated to 623 psi at 200 °F and NSF 61 compliant for potable water

  • TypeDrain Components
  • Seamless copper construction resists leaks and corrosion
  • Type L wall rated to 623 psi at 200 °F
  • Meets ASTM B88, NSF 372 and NSF/ANSI/CAN 61 for potable water
  • Hard-temper straight tubing holds shape during installation
  • 5 ft length of 1/2 in OD simplifies custom runs

Copper tubing for potable water systems

This 5 ft straight length of Type L copper tube carries a 1/2 in outside diameter and a 0.43 in inside diameter. It meets ASTM B88 and NSF/ANSI/CAN 61 standards for drinking water use. The seamless C12200 copper construction is rated to 623 psi at 200 Degrees F and handles temperatures up to 400 Degrees F.

Fits 3/8 in copper tube size fittings

The hard temper and 0.035 in wall thickness allow the tube to hold its shape during bending and soldering without kinking. It arrives uncapped and uncoated so installers can clean, flux and join it directly with sweat fittings or press-connect systems. No additional cleaning step is required before assembly.

Replaces worn or undersized supply lines

The jump is worth it when older tubing shows pitting, corrosion or reduced flow and a Type L wall provides extra margin over thinner alternatives. It is not suited for installations that demand pre-cleaned, capped lengths or for systems requiring a different tube size or temper.

Highlights

  • Seamless copper construction resists leaks and corrosion
  • Type L wall rated to 623 psi at 200 °F
  • Meets ASTM B88, NSF 372 and NSF/ANSI/CAN 61 for potable water
  • Hard-temper straight tubing holds shape during installation
  • 5 ft length of 1/2 in OD simplifies custom runs

Specifications

TypeDrain Components
BrandMueller Industries
ModelLH03005

Questions about this item

How much pressure can this 1/2 in copper tube handle at 200 °F?

It is rated for 623 psi at 200 °F, with a maximum operating temperature of 400 °F.

Does the hard-drawn temper make it noisy or hot when water runs continuously?

The rigid C12200 copper conducts heat efficiently and does not generate noise or excess heat during normal flow.

What fittings and tools are needed to install this straight length?

You will need 1/2 in OD compression or sweat fittings, a tubing cutter, and a deburring tool for clean joints.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.