We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight copper tube, 1/2 in OD, 2 ft length, hard temper

Mueller Industries, Inc.

Mueller Industries, Inc. LH03002 Copper Trap 1/2 in OD 2 ft Type L

SKU CH-60PF-W89RW MPN LH03002

Seamless Type L copper tube, 1/2 in OD, 2 ft straight length for potable water systems

  • TypeDrain Components
  • Seamless copper construction resists leaks and corrosion
  • Hard-drawn temper withstands 623 psi at 200 degrees F
  • Meets ASTM B88 and NSF 61 for potable water
  • 3/8 in copper tube size with 0.375 in inside diameter
  • Two-foot straight length ready for custom fabrication

Copper Type L tubing for potable water systems

This straight copper tube meets ASTM B88 and NSF standards for drinking water supply. The seamless C12200 alloy construction suits residential and commercial plumbing installations. Hard temper provides rigidity for exposed runs.

Rated 623 psi at 200 Degrees F

The tubing withstands high pressure and temperature conditions in hot water distribution. Seamless fabrication eliminates leak paths under thermal cycling. No special coatings or treatments are applied to the copper surface.

1/2 in outside diameter with 0.035 in wall thickness

The 3/8 in copper tube size fits standard compression and solder fittings for 1/2 in OD connections. Two foot straight lengths reduce joints in short runs. Supplied uncapped and ready for cutting to exact field measurements.

Highlights

  • Seamless copper construction resists leaks and corrosion
  • Hard-drawn temper withstands 623 psi at 200 degrees F
  • Meets ASTM B88 and NSF 61 for potable water
  • 3/8 in copper tube size with 0.375 in inside diameter
  • Two-foot straight length ready for custom fabrication

Specifications

TypeDrain Components
BrandMueller Industries
ModelLH03002

Questions about this item

How do I install the 1/2 in OD Type L copper tubing for a drain connection, and what step is often missed?

Cut the 2 ft length to size, deburr the inside diameter of .375 in, clean both ends, apply flux, and solder using fittings rated for 623 psi at 200 Degrees F; the step often missed is deburring, which can restrict flow.

What maintenance or replacement will the seamless C12200 copper tubing need over time?

The hard-temper, seamless tubing resists corrosion under normal potable-water use; inspect joints periodically for green staining or pinholes, and replace any section that shows external damage or leakage.

What is the first limit reached under sustained high-temperature drain flow?

The maximum operating temperature is 400 Degrees F; above this the copper can anneal and lose pressure rating, so sustained flow should stay well below that threshold.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.